Capture 20150721 3
Channel:
Subscribers:
613
Published on ● Video Link: https://www.youtube.com/watch?v=q_sMDMoQbGA
0If the router needs to map the VCs to network layer addresses, it sends an Inverse ARP message on each VC. The Inverse ARP message includes the network layer address of the router, so the remote DTE, or router, can also perform the mapping. The Inverse ARP reply allows the router to make the necessary mapping entries in its address-to-DLCI map table. If several network layer protocols are supported on the link, Inverse ARP messages are sent for each one.
Other Videos By Computertechlighthouse
| 2015-08-10 | Packet Tracer: Static route dengan exit interface |
| 2015-08-06 | Configure and verify R1 |
| 2015-08-06 | Implementing Basic Addressing Scheme |
| 2015-08-06 | Cabling devices di packet tracer |
| 2015-08-04 | VPN remote akses pada packet tracer |
| 2015-08-02 | Membuat GUI/userform di Microsoft Excel bag. 2 |
| 2015-08-01 | Membuat GUI/userform di Microsoft Excel bag. 1 |
| 2015-07-28 | Problemcatur#1 dengan narasi |
| 2015-07-26 | Paduan suara Talitakum |
| 2015-07-26 | Paduan Suara Talitakum |
| 2015-07-21 | Capture 20150721 3 |
| 2015-07-20 | Virtual Circuits |
| 2015-07-20 | Identifying VC |
| 2015-07-17 | Condition |
| 2015-07-17 | Variabel |
| 2015-07-17 | Operasi Matematika |
| 2015-07-11 | Floating static route / back-up route |
| 2015-06-21 | RipV2 Equal Cost Load-Balancing Tipe Paket bukan Tipe Destination |
| 2015-05-29 | Chat program [Programming Jokes] |
| 2015-05-28 | Factory Reset VAIO Laptop and Windows 8 |
| 2015-05-22 | IPv4 prefix slash notation to decimal dotted conversion(Euclidian Method) |