A4988 breakout prototype testing ⚙️🔧

Channel:

Adafruit Industries

Subscribers:

459,000

Published on November 24, 2024 12:00:00 AM ● Video Link: https://www.youtube.com/watch?v=QrSOgbf9tSw

Duration: 0:00

2,235 views

89

We got our Allegro A4988 stepper driver breakout PCBs back and are ready to test them. First, we verified that STEP and DIR worked (yes!) and that the LEDs lit (yes, but we need to tweak the resistors to make the brightness even). Then we tried all of the stepper-settings, you can select 1, 4, 8, or 16-microsteps. All the sleep/reset/enable pins work. Finally, we checked the current limiting functionality with a potentiometer that can be twisted to select up to 2A current per coil. This directly affects the torque, so it's easy to test by verifying that we can stall the motor with hands or vise-grips. We'll order these with 2oz copper and get them into production next!

Visit the Adafruit shop online - http://www.adafruit.com/

-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------

#a4988 #stepperdriver #electronics