Fix A fatal hardware error has occurred 0x8000000000000002 on Windows
1Here's how to Fix A fatal hardware error has occurred 0x8000000000000002 on Windows.
i. A fatal hardware error can be caused by a variety of problems, including:
* A hardware failure, such as a bad hard drive or a faulty memory module.
* A power surge or power outage.
* A software problem, such as a driver conflict or a virus.
If you are getting a fatal hardware error, there are a few things you can do to try to fix it:
* **Check your hardware.** Make sure that all of your hardware is properly connected and that there are no loose cables. You can also try reseating your memory modules and your graphics card.
* **Check your power supply.** If your power supply is not providing enough power to your computer, it can cause a variety of problems, including fatal hardware errors. You can try using a different power supply or testing your current power supply with a power supply tester.
* **Check your drivers.** Make sure that all of your drivers are up to date. You can download the latest drivers from the manufacturer's website.
* **Run a virus scan.** A virus can sometimes cause a fatal hardware error. You can run a virus scan with your antivirus software.
* **Restore your system to a previous point in time.** If you have a system restore point from before the fatal hardware error occurred, you can restore your system to that point.
If you have tried all of the above and you are still getting a fatal hardware error, you may need to replace the faulty hardware component.
ii. Windows error 0x8000000000000002 is a critical system error that can occur for a variety of reasons. Some of the most common causes include:
* A hardware failure, such as a bad hard drive or a faulty memory module.
* A power surge or power outage.
* A software problem, such as a driver conflict or a virus.
If you are getting Windows error 0x8000000000000002, there are a few things you can do to try to fix it:
* **Check your hardware.** Make sure that all of your hardware is properly connected and that there are no loose cables. You can also try reseating your memory modules and your graphics card.
* **Check your power supply.** If your power supply is not providing enough power to your computer, it can cause a variety of problems, including Windows error 0x8000000000000002. You can try using a different power supply or testing your current power supply with a power supply tester.
* **Check your drivers.** Make sure that all of your drivers are up to date. You can download the latest drivers from the manufacturer's website.
* **Run a virus scan.** A virus can sometimes cause Windows error 0x8000000000000002. You can run a virus scan with your antivirus software.
* **Restore your system to a previous point in time.** If you have a system restore point from before the Windows error 0x8000000000000002 occurred, you can restore your system to that point.
If you have tried all of the above and you are still getting Windows error 0x8000000000000002, you may need to replace the faulty hardware component.
Here are some additional tips that may help you fix Windows error 0x8000000000000002:
* If you are getting the error after installing a new piece of hardware, try uninstalling the hardware and see if the error goes away.
* If you are getting the error after installing a new software program, try uninstalling the program and see if the error goes away.
* If you are getting the error after making a change to your system settings, try reverting to the previous settings and see if the error goes away.
iii. A PC PSU can detect high temperature. Most modern PC power supplies have thermal sensors that monitor the temperature of the power supply itself, as well as the temperature of the components that it is powering. If the temperature of the power supply or its components gets too high, the power supply will shut down to prevent damage.
There are a few different ways that a PC PSU can detect high temperature. One common method is to use a thermistor, which is a type of resistor that changes its resistance depending on its temperature. The power supply will have a circuit that measures the resistance of the thermistor and uses that value to calculate the temperature.
Another common method for detecting high temperature is to use a thermal fuse. A thermal fuse is a type of fuse that melts at a certain temperature. If the temperature of the power supply or its components gets too high, the thermal fuse will melt and break the circuit, shutting down the power supply.
Finally, some power supplies also have temperature-controlled fans. These fans will only turn on if the temperature of the power supply or its components gets too high. This helps to keep the temperature of the power supply down and prevent it from overheating.
Learn more@ https://www.youtube.com/c/ITGuides/search?query=Windows.