Duration: 6:20

28 views

0

Nintendo released the Game Boy Advance SP, model number AGS-001, on March 23, 2004.

The back cover is the only layer between the motherboard and the many things things that can ruin the motherboard. Expect the six screws that hold the cover to the device to be fastened tightly.
Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.
Lift the back cover off of the device.

Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.

Look out for the power switch that can fall out when taking the back cover off.

Aqui otro tutorial rapido de como abrir tu gba y chequiar si esta sucia y darle mantenimiento y si estan los botones shouder defectuosos como suele suceder mucho en este modelo sp pues los reparas de vez con este truco sin nececidad de remplazo o soldaduras subscribete si te gusta este video!

necesitaras :
tools especiales (destornilladores 3 puntas)
navaja o x-acto
pinzas
y un buen pulso en la mano
y vision 20/20


#mainteinance #gbasp #fixed