Duration: 0:00

70 views

1

If your toilet flushes too hard, causing water to splash or leak, there are several adjustments and fixes you can try to reduce the intensity of the flush and control lower water flow:
1. Adjust the Water Level in the Tank
Check the Float Position:
The float in your toilet tank controls the water level. Lower the float to reduce the amount of water entering the tank.
For a ballcock-style float, bend the rod downward.
For a cup-style float, adjust the clip or screw to lower it.
Aim for the Right Water Level:
The water level should be about an inch below the overflow tube.
2. Check and Adjust the Flush Valve
Inspect the Flapper:
If the flapper is staying open too long, it can cause a forceful flush. Ensure it closes smoothly after releasing enough water.
Replace the Flapper:
If it’s worn or doesn’t seal well, replace it with a compatible one. Flappers are inexpensive and easy to install.
3. Install a Tank Baffle or Flow Restrictor and stop leaking fix
A tank baffle or flush valve restrictor slows the water exiting the tank, reducing flush force. These are available at hardware stores and are simple to install.
4. Inspect the Fill Valve
Adjust Fill Valve Pressure:
Some fill valves have an adjustable flow rate. Lowering the flow rate can reduce how hard the toilet flushes.
Replace the Fill Valve:
If it’s malfunctioning or set to release too much pressure, consider replacing it with a quieter or pressure-regulated model. #toiletrepair

Disclaimer: As an Amazon Associate I earn from qualified purchases.