Lock On: Flaming Cliffs 2: How to take off
Channel:
Subscribers:
11,500
Published on ● Video Link: https://www.youtube.com/watch?v=wY_J9RGEgJ0
Flaming Cliffs 2 Take off Procedure
1. Request permission to start engine: "\"
2. Close the canopy: " C+LCtrl"
3. Left engine start: "R Alt+Home"
4. Right engine start: R Ctrl+Home"
5. Request permission to taxi to runway: "\"
6. Throttle up "Page up" two notches
7. Use the rudder to steer your aircraft to the runway: "z" left rudder "x" right rudder
8. Wheel brakes: "W"
9. Get to the runway and brake and throttle to zero
10. Request permission from tower to take off: "\"
11. Landing flaps: "F"
12. Throttle up about 4 notches and get to a speed of 190 mph
13. Pull up on the stick or press down to put the nose up.
14. After you are airborne, landing gear up: "G"
Other Videos By Ace1000ks1975
2012-06-01 | Strike Commander (1993) Opening Scene |
2012-06-01 | Mechwarrior (1989) DOS: Bar Scene Adlib |
2012-05-31 | Lock On Flaming Cliffs 2: A-10 GAU 30mm Cannon |
2012-05-30 | Lock On Flaming Cliffs 2: A-10 Air to ground mode Maverick AGM |
2012-05-26 | Lock On: Flaming Cliffs 2: Beyond Visual Radar Mode |
2012-05-26 | Lock On: Flaming Cliffs 2: Bore Sight Radar Mode |
2012-05-26 | Lock On: Flaming Cliffs 2: Close Combat Radar AIM-9 |
2012-05-26 | Lock On: Flaming Cliffs 2: Close Combat Radar Cannon Mode |
2012-05-26 | Lock On: Flaming Cliffs 2: Navigational Mode |
2012-05-26 | Lock On: Flaming Cliffs 2: F-15 How to Land F-15 |
2012-05-26 | Lock On: Flaming Cliffs 2: How to take off |
Tags:
Takeoff