snow leopard hazard amd reboot solution

Channel:
Subscribers:
4,900
Published on ● Video Link: https://www.youtube.com/watch?v=ZcxeRI9l8Ig



Duration: 2:34
5,860 views
19


http://www.mediafire.com/?4mwyzyztzhk

1. Insert your BootCD into DVD/ROM and boot/start your PC.

2. On the boot prompt, press Enter. You will be asked to enter a two-digit hexadecimal boot device (do not press any key).

3. Remove the BootCD and replace it with the Hazard Snow Leopard. Wait for the blinking light on your DVD drive to stop and then hit Enter (this will read your DVD drive and not your HD). You will still be asked to hit f8 and i entered flags -v -x. Try these and you should be ok.

4. Perform the Hazard Snow Leopard installation. You may need to use Disk Utility (under the Utilities Menu) to partition and format your HD if you haven't already. Make sure to select GUID (under Options) and remember to customise your install before setting it going.

5. Restart after the installation







Tags:
snow
leopard.
hazard.
amd