SOLDERING THE V4 + FPCB KIT

Channel:
Indonesia sthetix
Subscribers:
105,000
Published on ● Video Link: https://www.youtube.com/watch?v=O9qVOqRY7WI


Category:
Guide
Duration: 15:41
48,213 views
926

!!!! FOR YOUR INFO - THIS VIDEO IS NOT UPDATED YET - THERE WILL BE A NEW GUIDE SOON !!!!!!!

Here are some updates about installing the OLED chip per 02/03/2023

1. I no longer reflow the DAT0 adapter as the failure rate is higher than just the friction connection. It will averagely last about 3 months after the eMMC balls crack due to internal heat from the console. The difference in tin composition between the one on the DAT0 fork and the one under the eMMC is the issue, boosted by the internal heat.

2. And I no longer use the FPCB kit as it could cause interference with the 3.3V signal. It will block you from booting the OFW and the sysMMC. Although they have updated the design, I am back to using fly wires now.

3. I added a magnetic reed switch (internally) near the USB port, so if at some point the chip is not working, you can use a magnet to reset the chip and see its response. If the console boots to the OFW, there is something wrong with the chip. But if the console cannot boot to OFW, the eMMC is damaged or something else. So it is a debugging feature without disassembling the console.

Please do not follow the v4 video, ESPECIALLY on the reflow and FPCB parts.

I▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC

https://elements.envato.com/lounging-hip-hop-ZDTQQUT
https://elements.envato.com/chill-hip-hop-intro-FBGWPFE
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
HOW TO CONTACT ME

https://linktr.ee/sthetixofficial

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
DONATION

https://www.buymeacoffee.com/sthetixofficial


▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CREDIT






#sthetix #sthetixofficial



Other Videos By sthetix


2022-10-29THE 3DS FINALIZING SETUP
2022-10-28THE 3DS SEEDMINER FOR 11.16 - BANNERBOMB3 - UNSAFE MODE - FREDTOOL
2022-10-16UPDATING THE HATS + AMS + FW SAFELY
2022-10-12WHICH ONE IS BETTER ?
2022-10-07CLONING AND REPLACING THE EMMC CHIP USING THE UFI BOX
2022-10-04LEMUNA : THE SMART EYEWEAR REVIEW
2022-09-29HOW TO FIX : NINTENDO SWITCH NOT DETECTING 5GHZ WIFI
2022-09-19THE LYTMI SCREEN SYNC LIGHT BAR
2022-08-29EXPOSING THE CLK (D) POINT OF THE SWITCH OLED
2022-08-27NINTENDO SWITCH OLED SPLATOON EDITION TEAR DOWN
2022-08-20SOLDERING THE V4 + FPCB KIT
2022-08-05THE COLOLIGHT TRIANGLE RGB KIT
2022-07-23HOW TO SET UP THE CONSOLE FROM SCRATCH
2022-07-20REMOVING THE NINTENDO SWITCH BATTERY EASILY
2022-07-15THE PRODINFO GEN TOOL
2022-06-27THE GRIDSTUDIO GAME BOY : UNBOXING AND REVIEW
2022-05-23DBI MTP RESPONDER METHOD
2022-05-23ALTERING THE JAPANESE WII U LANGUAGE
2022-05-03USING THE MISSION CONTROL TO CONNECT VARIOUS GAMEPADS
2022-04-06HOW TO CUT THE SWITCH CPU METAL SHIELD EASILY
2022-03-28HOW TO DEACTIVATE THE JOYCONS TO SAVE THE BATTERY POWER


Tags:
soldering guide
how to solder a motherboard
soldering the v4
soldering the pcb