Space Elevator Mk. II (Tutorial in description)
609Higher. Faster. Stronger. All you need is a curb.
Tutorial:
1. Make sure you're in "free play" mode.
2. Set a session marker on the curb, facing the curb, off your board.
3. Set up the props like so. Set up everything but the manny pad, with the plywood positioned so that when you load your session marker, the arm that is not holding the board is above the middle of the plywood. Once you have everything in position, place the manny pad in the middle of the plywood.
4. Add the manny pad and plywood to your session marker (for multiple attempts, in case you don't get it the first time).
5. Go into Options / Extras / Cheat Codes and enter the cheat "zombie"
6. Load your session marker. Press Triangle/Y to start a drop in onto the curb
7. In the middle of your drop in, go back into the cheat codes menu and type "zombie" again. When exiting the pause menu, press Triangle/Y immediately AFTER exiting the pause menu, and hold the button.
8. TO SPACE
If you respawn / fall off, go into the replay editor and look at which side of the elevator lifts up before it fails. Then delete the manny pad, move the plywood slightly in the direction of that side, place a new manny pad and try again. It might take some adjustment but it's way more reliable than the previous space elevator glitch. It would take hours previously to get as high as the highest building, and now you can get much higher in a matter of minutes.
If you want to get the most height possible, this seems counter intuitive, but you actually want the front of the elevator to lift up somewhat. This is the most stable configuration, since the back lifting up will actually make you reset. So if it's almost perfectly balanced but you're teleporting off of the elevator, try moving the elevator towards your skater's back so the front lifts up slightly before it stabilizes.
Other Videos By HelixSnake
| 2020-11-01 | Helix Snake's Teardown Glitch Adventure (Hardest Challenge Completed With Glitches) |
| 2020-10-31 | Helix Snake Plays Teardown (Full Stream) Part 1 |
| 2020-10-18 | Stuff that only works at low GSP |
| 2020-07-16 | When you watch too much Jojo's Bizarre Adventure |
| 2020-07-09 | Skate 3 Funny Stuff Compilation #13 |
| 2020-07-08 | Shake that groove thang |
| 2020-07-07 | King of the Zombies |
| 2020-07-06 | I wanna fly high |
| 2020-07-05 | Predated |
| 2020-07-04 | Scoot By The Foot |
| 2020-07-03 | Space Elevator Mk. II (Tutorial in description) |
| 2020-07-02 | Instant Karma |
| 2020-07-01 | Fusion failure |
| 2020-06-29 | Stairs are for squares |
| 2020-06-28 | Poppingamer |
| 2020-06-27 | revenge is bad |
| 2020-06-26 | I told you don't touch that darn thing |
| 2020-05-31 | DMC5 Redline Challenge (Vergil DMD, Cavaliere R only, Swordmaster only, no Sin DT) S Rank |
| 2020-05-13 | When you don't feel like fighting Proto Angelos |
| 2020-03-23 | The Ori 2 Torch% Run is born |
| 2020-03-22 | Beating the final boss in Ori 2 with only the torch |
Other Statistics
Skate 3 Statistics For HelixSnake
Currently, HelixSnake has 18,727,769 views for Skate 3 across 152 videos. The game makes up 10 hours of published video on his channel, or 9.33% of the total watchable video for Skate 3 on HelixSnake's YouTube channel.