1/5 Semnalul trenului împarte șinele în blocuri și permite locomotivelor să răspundă la alte locomot
Autoritatea Feroviară Română:Train signalThe train signal divides rails into blocks and enables locomotives to respond to other locomotives so that multiple trains can use the same rails without colliding. Blocks extend across all connected rails, regardless of whether a train can actually travel between them. Train signals can also be used in conjunction with train chain signals, which also separate rails into blocks. In addition to the explanations on this page, there is also the train signal tutorial.Signals that divide rails into blocks. Each block is highlighted with a different color.Contents 1 direction 2 status displays 3 circuit network 4 See alsodirectionWhich block monitors a signal depends on which side of a rail it is placed. If there is a signal on the right-hand side of the track, it monitors and protects the rail block behind it until the next signal or until the end of the track. When placing train signals, the train signal blocks are visible and the opposite signal position is highlighted in white. A train in automatic mode does not move onto a track if it would pass a signal on the left side, unless there is also a signal on the right side opposite the left signal.Status indicatorsTrain signals have four status indicators: Green - the monitored block is empty. Yellow - A train cannot stop in front of the monitored block and will pass the signal. The debug option show-train-braking-distance can be used to show the distance it will take a locomotive to stop. A yellow signal means that a train is approaching and already has permission to enter the next block. The block is reserved for a train and all other entry signals for this block turn red. Red - The monitored block is not empty or some other signal monitoring it is yellow. Flashing - The signal is not on a rail, or the monitored block is also the block in front of the signal.If a signal is red, the locomotives will stop in front of it. A train chain signal can be used to stop locomotives earlier as they always indicate the signal following the signal.Circuit networkThe user interface for configuring the train signal for connection to a circuit network.A circuit network condition can be configured which, if true, turns the train signal to red.A train signal can also output three different signals, depending on whether it is in the green, yellow or red state. If a train signal is red due to a circuit network condition, the train signal does not send a signal to the circuit network -Semnal trenSemnalul trenului împarte șinele în blocuri și permite locomotivelor să răspundă la alte locomotive, astfel încât mai multe trenuri să poată utiliza aceleași șine fără a se ciocni. Blocurile se extind pe toate șinele conectate, indiferent dacă un tren poate călători de fapt între ele. Semnalele de tren pot fi, de asemenea, utilizate împreună cu semnale de lanț de tren, care separă, de asemenea, șinele în blocuri. Pe lângă explicațiile de pe această pagină, există și tutorialul semnalului trenului.Semnalele care împart șinele în blocuri. Fiecare bloc este evidențiat cu o culoare diferită.Cuprins 1 direcție 2 afișări de stare 3 circuite de rețea Deci 4 lacdirecţieCare bloc monitorizează un semnal depinde de ce parte a unei șine este plasat. Dacă există un semnal pe partea dreaptă a pistei, acesta monitorizează și protejează blocul feroviar din spatele acestuia până la următorul semnal sau până la sfârșitul pistei. La plasarea semnalelor de tren, blocurile de semnal de tren sunt vizibile și poziția opusă a semnalului este evidențiată în alb. Un tren în modul automat nu se deplasează pe o cale dacă ar trece un semnal pe partea stângă, cu excepția cazului în care există și un semnal pe partea dreaptă opus semnalului stâng.Indicatori de stareSemnalele de tren au patru indicatori de stare: Verde - blocul monitorizat este gol. Galben - Un tren nu se poate opri în fața blocului monitorizat și va trece semnalul.
Other Videos By GAMING VIDEOS
Other Statistics
Transport Fever 2 Statistics For GAMING VIDEOS
There are 6,217 views in 310 videos for Transport Fever 2. This game accounts for over 16 days of watchable video on his channel, or 6.75% of the total watchable video for Transport Fever 2 on GAMING VIDEOS 's YouTube channel.