Another Ebike motor repair video hall & temp sensor replacement #101 just for GP.
18I've done plenty hall sensors repairs on this ch one more won't hurt and since I continue to get lots of motor repairs means people still don't Wana attempt to do them. While they are really tedious if you can solder well and have good wiring skills and are able to disassemble and reassemble your motor is definitely a DIY skill that will save you allot of money. Repair shops charge quite a bit to replace them because it's a pain in the ass to be honest. Once you've done it a few times you'll be a pro. Not all motors have temp sensors btw and I do recommend getting rid of the pc board always. Makes repairs in the future much easier. It's pack building and bike modding season if didn't know. HONEYWELL S&C SS41 IC, HALL EFFECT SENSOR, BIPOLAR, TO-92-3 (5 pieces) https://a.co/d/1OXHpu6 these can be wired directly and work fine. The original hall sensors did have some resistors in the board for bias voltage but the ones I use and most manufacturers don't need any special bias.