Build Your Own FINALMOUSE XLAT Latency Tester - Step-by-Step Instructions!
60This is how you can build the newly announced Finalmouse XLAT click latency measuring tool by yourself! It is a very easy project and if you have fallen into the bottomless pit of gaming mice enthusiasm, it's totally worth it. Thank you finalmouse for making this tool accessible for everyone and for the great instructions!
Link 1 (Instructions): https://github.com/teamfinalmouse/xlat/wiki/Build-your-own-XLAT
Link 2 (Conversion software and downloads): https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/
Link 3 (firmware): https://github.com/teamfinalmouse/xlat
Parts list:
- STM32F746G-Disco Devboard, link: https://www.mouser.fi/ProductDetail/STMicroelectronics/STM32F746G-DISCO?qs=KuGPmAKtFKV4xEByQ7IKqA%3D%3D
- Micro-USB OTG Cable
- Mini-USB Cable
- 5V USB Power Brick
Mechanical mods:
- 10-pin 2.54mm pinheader, link: https://www.reichelt.com/de/en/pin-header-rm-2-54mm-angled-1-row-10-pin-w-p-946-14-010-p330985.html?r=1
- Some wire, mine was 2 x 0,5mm² wire
- Cable shrink tubing
- A small ziptie
- Plus basic soldering tools; soldering iron, some solder etc.
- Some quick connectors, for example: https://shorturl.at/ehuM2
- Small alligator clips (optional)
3D printed case files: https://www.thingiverse.com/thing:3455625
4pc of M3x16 screws if you print the case
⚫ Socials:
https://twitter.com/jerrorr_/
⚫ Affiliate links and discount codes:
Pulsar Affiliate Link
Global: https://www.pulsar.gg/?ref=JERRORR
EU: https://pulsargg.eu/?ref=JERRORR
G-Wolves Affiliate Link ($10 OFF): JERRORR
https://shop.g-wolves.com/?ref=jerrorr
GET 5$ OFF from mechkeys.com with the code: jerrorr5
(single use per customer, no comission)
Timestamps:
00:00 What is an XLAT?
00:30 Getting the main components
00:56 Flashing the firmware
02:38 Hardware modifications
05:02 How to measure click latency with XLAT