F-22 Raptor ✈️ 120fps Slow Motion
22Shameless plug: if you want to contribute to my work, please consider having a look at some of my merch! ;)
airguardian.creator-spring.com
Coolest maneuvers:
0:00 - Cool low flyby
0:26 - Take-off #1
0:35 - Loaded roll
1:00 - Cool break, flying straight into the camera
1:50 - Banana pass (flyby) + wide exit spiral
3:30 - Ascending roll + backflip
4:18 - High alpha flyby with full span flaperons #1
5:12 - High alpha flyby with full span flaperons #2
5:40 - Ascending loaded roll (partial)
5:55 - Cooler flyby
6:35 - Cooler-er flyby
7:10 - Cobra snap + flat spin #1
7:46 - Immelmann
7:58 - High AoA loaded roll (That one was sm0000th!)
8:16 - Descending roll right in front of camera (low altitude)
8:30 - Landing #1
8:45 - Take-off #2
9:00 - Knife edge (if you can believe that!)
9:43 - Landing #2
9:50 - Pedal turn (stall turn)
10:00 - w00t
10:10 - Flat spin #2
10:40 - Flat spin #3
Mind that although most of the jet is stock, I performed several modifications. Removed the infamous Blue Box and wing ribbon wires, passed individual leads to wing servos, mixed them all separately, removed pilot figure and nose gear light, installed a HE A3S3 gyro (which required physical servo reversing one stabilator servo, inverting motor and pot wires), added a green LED to make a fake HUD reflection effect, airbrushed the canopy to make it look more golden, like the full-scale one. Need to pick the sun at the right angle to show up though!
These were flights 19th and 20th on 'Scarlett'.
Pilot: RC4ever
Ground video: Luis Ibáñez
Airfield: Club Els Cards
Music: Led Zeppelin cover by Tool
SPECS (Reflecting my setup):
Freewing F-22 Raptor Ultra Performance 8S 90mm EDF Jet - PNP
12-Blade EDF power system (installed)
4075-1390Kv inrunner brushless motor (installed)
150A ESC with EC5 connector (installed)
Electronic retractable landing gear (installed)
Servos, LED Lights (installed)
Model Scale: 1/13th
Wingspan: 1060mm
Length: 1500mm
Empty Weight: Around 3100g (w/o battery)
TOW: Around 3900g
CG: +160mm from the leading edge of the wing at the root
Material: EPO
Motor: Stock 8S 4075-1390Kv Inrunner
ESC: Stock Freewing (Hobbywing) 150A, HV
EDF: Stock Freewing 90mm 12-Blade
Servos: (All stock)
- 2x 9g Digital hybrid gear
- 2x 17g Digital metal gear
- 6x 23g Digital metal gear
Landing Gear: Electronic retractable with all metal shock absorbing struts
Receiver: FrSky X8R, using 12 channels so far (user choice)
Gyro: Hobby Eagle A3S3 (added as a mod)
Separate UBEC: TGY 8-15A (added as a mod)
Receiver battery: Rhino 2S 500 and 610mAh (added as a mod)
Main battery packs: (All weighing around 800g combined)
- HRB 2x 4S 4200mAh 50C
- Turnigy Panther 2x 4S 3000mAh 75C
- Turnigy Nanotech 2x 4S 3300mAh 70C
More details on my setup coming soon!
Link to the product page (8S Freewing F-22 Raptor):
https://www.motionrc.eu/products/freewing-f-22-raptor-ultra-performance-8s-90mm-edf-jet-pnp
---------------------------------------------------------------------------------------------------------
You can also follow me on:
Facebook: https://www.facebook.com/RC4ever
Instagram: https://www.instagram.com/Airguardian
Twitter: https://www.twitter.com/RC4Media