F-22 Raptor (Freewing) ✈️ Slow Motion Action!!
46Slow Motion really accentuates the scale behaviour of these jets, always a thrill to replay flights in slowmo and examine them up closely to get to see all the control surface movements and corrections as well of all the subtleties of how the plane moves through the air... I love it!
The RACBSA airfield lends itself much more to low altitude flybys, knife edges and other similar maneuvers. Not having the hill with the forest from my other club right in front gives me quite some freedom to experiment with different flight routines! ^^
Shameless plug: if you want to contribute to my work, please consider having a look at some of my merch! ;)
https://airguardian.creator-spring.com
This was flight 157th on 'Scarlett'.
Pilot: RC4ever
Ground video: Luis Ibáñez
Airfield: RACBSA
SPECS (Reflecting my setup):
Freewing F-22 Raptor Ultra Performance 8S 90mm EDF Jet - PNP
12-Blade EDF power system (installed)
4075-1390Kv inrunner brushless motor (installed)
150A ESC with EC5 connector (installed)
Electronic retractable landing gear (installed)
Servos, LED Lights (installed)
Model Scale: 1/13th
Wingspan: 1060mm
Length: 1500mm
Empty Weight: Around 3100g (w/o battery)
TOW: Around 3900g
CG: +160mm from the leading edge of the wing at the root
Material: EPO
Motor: Stock 8S 4075-1390Kv Inrunner
ESC: Stock Freewing (Hobbywing) 150A, HV
EDF: Stock Freewing 90mm 12-Blade
Servos: (All stock)
- 2x 9g Digital hybrid gear
- 2x 17g Digital metal gear
- 6x 23g Digital metal gear
Landing Gear: Electronic retractable with all metal shock absorbing struts
Receiver: FrSky X8R, using 12 channels so far (user choice)
Gyro: Hobby Eagle A3S3 (added as a mod)
Separate UBEC: TGY 8-15A (added as a mod)
Receiver battery: Rhino 2S 500 and 610mAh (added as a mod)
Main battery packs: (All weighing around 800g combined)
- HRB 2x 4S 4200mAh 50C
- Turnigy Nanotech 2x 4S 3300mAh 70C
Mind that although most of the jet is stock, I performed several modifications. Removed the infamous Blue Box and wing ribbon wires, passed individual leads to wing servos, mixed them all separately, removed pilot figure and nose gear light, installed a HE A3S3 gyro (which required physical servo reversing one stabilator servo, inverting motor and pot wires), added a green LED to make a fake HUD reflection effect, airbrushed the canopy to make it look more golden, like the full-scale one. Need to pick the sun at the right angle to show up though!
More details on my setup coming (soon?)!
---------------------------------------------------------------------------------------------------------
You can also follow me on:
YouTube: https://www.youtube.com/Airguardian
Facebook: https://www.facebook.com/RC4ever
Instagram: https://www.instagram.com/Airguardian
Twitter: https://www.twitter.com/RC4Media