Fix Xbox 100% Packet Loss Error for Series X|S and One
Here's How to Fix Xbox 100% Packet Loss Error for Series X|S and One.
If you're experiencing 100% packet loss error on your Xbox Series X|S or One, try the following steps:
1. Check your network connection: Make sure your Xbox is connected to a stable and reliable network connection, either through Ethernet or Wi-Fi. If you're using Wi-Fi, try moving your router closer to your Xbox or connecting directly through Ethernet cable.
2. Restart your Xbox: Try restarting your Xbox by pressing and holding the Xbox button on the console for 10 seconds until it turns off. Then, wait a few seconds and turn it back on.
3. Restart your network devices: Try restarting your modem and router by unplugging them for 30 seconds and plugging them back in. This can help to reset your network connection and fix any issues.
4. Check for software updates: Make sure your Xbox is running the latest software updates by going to Settings - System - Updates & downloads and checking for any available updates.
5. Disable QoS settings: If you have Quality of Service (QoS) settings enabled on your router, try disabling them to see if that helps to fix the issue.
6. Contact your internet service provider: If you've tried all of these steps and are still experiencing 100% packet loss, contact your internet service provider to see if there are any known network issues in your area or if they can help troubleshoot the issue.
By trying these steps, you may be able to fix the 100% packet loss error on your Xbox Series X|S or One and get back to gaming online without any issues.