For using a multimeter to identify diode from electrical components. Choose the correct statemen...

Channel:
PW Solutions
Subscribers:
443,000
Published on ● Video Link: https://www.youtube.com/watch?v=nbojZbRXUcA


Duration: 4:21
1 views
0

For using a multimeter to identify diode from electrical components. Choose the correct statement out of the following about the diode:
(a) It is two terminal device which conducts current in both directions
(b) It is two terminal device which conducts current in one direction only
(c) It does not conduct current gives an initial deflection which decays to zero.
(d) It is three terminal device which conducts current in the direction only between central terminal and either of the remain in two terminals
📲PW App Link - https://bit.ly/YTAI_PWAP
🌐PW Website - https://www.pw.live



Other Videos By PW Solutions


2023-06-09In a communication system, noise is most likely to affect the signal (a) At the transmitter (b) ...
2023-06-09Range of frequencies allotted for commercial \( \mathrm{FM} \) radio broadcast is (a) 88 to \( 1...
2023-06-09A TV tower has a height of \( 75 \mathrm{~m} \). What is the maximum distance and area up to whi...
2023-06-09A zener is breakdown voltage \( V_{Z}=8 \mathrm{~V} \) and maximum zener current \( I_{Z M}=10 \...
2023-06-09For a transistor to act as a switch, it must be operated in (a) Active region (b) Saturation sta...
2023-06-09In the following circuit, the correct relation between output (Y) and inputs \( A \) and \( B \)...
2023-06-09Given below are two statement: One is labelled as Assertion A and the other is labelled as Reaso...
2023-06-09A transistor is used in an amplifier circuit in common emitter mode. If the base current changes...
2023-06-09Identical the correct logic gate for the following output \( (Y) \) of two inputs \( A \) and \(...
2023-06-09In the given circuit the input voltage \( \mathrm{V}_{\text {in }} \) is shown in figure. The cu...
2023-06-09For using a multimeter to identify diode from electrical components. Choose the correct statemen...
2023-06-09As per the given circuit, the value of current through the battery will be A.
2023-06-09The positive feedback is required by an amplifier to act an oscillator. The feedback here means ...
2023-06-09The I-V characteristics of \( a p-n \) junction diode in forward bias is shown in the figure. Th...
2023-06-09Identify the logic operation performed by the given circuit: (a) AND gate (b) OR gate (c) NOR ga...
2023-06-09The photodiode is used to detect the optical signals. These diode are preferably operated in rev...
2023-06-09In an experiment of CE configuration of \( n-p-n \) transistor, the transfer characteristics are...
2023-06-09A transistor is used in common-emitter mode in an amplifier circuit. When a signal of \( 10 \mat...
2023-06-09In the given circuit the value of current \( I_{L} \) will be mA. (When \( R_{L}=1 \mathrm{k} \O...
2023-06-09A \( n-p-n \) transistor is connected in common emitter configuration in a given amplifier. A lo...
2023-06-09The input signal given to a \( \mathrm{CE} \) amplifier having a voltage gain of 150 is \( V_{i}...