Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Re....

Channel:
PW Solutions
Subscribers:
443,000
Published on ● Video Link: https://www.youtube.com/watch?v=mAdFMj9CV8I


Duration: 2:05
1 views
0

Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Reason (R).Assertion (A): For measuring the potential difference across a resistance of 600Ω, the voltmeter with resistance 1000Ωwill be preferred over voltmeter with resistance 4000Ω.Reason (R): Voltmeter with higher resistance will draw smaller current than voltmeter with lower resistance. In the light of the above statements, choose the most appropriate answer from the options given below. 📲PW App Link - https://bit.ly/YTAI_PWAP 🌐PW Website - https://www.pw.live



Other Videos By PW Solutions


2024-05-09Current density is a ....
2024-05-09The rate of flow of electric charges through any cross-section of a conductor is known as ....
2024-05-09The resistance of a galvanometer is 50 ohm and the maximum current which can be passed through i....
2024-05-09In order to measure the internal resistance r1 of a cell of emf E, a meter bridge of wire resist....
2024-05-09Two resistances R1=XΩ and R2=1Ω are connected to a wire AB of uniform r....
2024-05-09In the given figure, there is a circuit of potentiometer of length AB = 10Ω. The resistance....
2024-05-09In the balanced condition, the values of the resistances of the four arms of a Wheatstone bridge....
2024-05-09In Circuit-1 and Circuit-2 shown in the figures, R1=1Ω,R2=2Ω and R3=3&#....
2024-05-09The length of a potentiometer wire is 1200 cm and it carries a current of 60 mA. For a cell of e....
2024-05-09Resistances are connected in a meter bridge circuit as shown in the figure. The balancing length....
2024-05-09Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Re....
2024-05-09For designing a voltmeter of range 50 V and an ammeter of range 10 mA using a galvanometer which....
2024-05-09The resistive network shown below is connected to a D.C. source of 16 V. The power consumed by t....
2024-05-09For the network shown below, the value of VB−VA is _________ V. ....
2024-05-09A potential V0 is applied across a uniform wire of resistance R. The power dissipation is P1. Th....
2024-05-09Shown in the figure is a semicircular metallic strip that has thickness t and resistivity ρ ....
2024-05-09In a building there are 15 bulbs of 45 W, 15 bulbs of 100 W, 15 small fans of 10 W and 2 heaters....
2024-05-09The equivalent resistance between A and B is _____ ....
2024-05-09The current l1 (in A) flowing through 1Ω resistor in the following circuit is ....
2024-05-09All resistances in figure are 1Ω The value of current ‘I’ is a5A. The valu....
2024-05-09A resistance is shown in the figure. Its value and tolerance are given respectively by: ....