Gooseneck UHF Microphone systems User Guide
0#gooseneck Microphone #Microphone #wirelessmicrophone #How-To Guide #User Manual
How to Sync and Pair UHF Wireless Microphone System
How to Up a Wireless Microphone System
How To Use A Lavalier Mic | How-To Guide
Wireless Microphone & Receiver User Manual
Wireless Microphone Manual
UHF Wireless Microphone System User Manual
Gooseneck,Lavalier, headband or handheld UHF systems User Guide
Instructions for use
1γ Connect to PC
1) Insert the USB end of the USB receiver into the USB interface
of the PC end, and the LED light of the USB receiver will flash for
1 second, then turn off.
2) Turn on the power switch of the host, the host and USB receiver
will automatically connect, and the LED light of the adapter will
remain on.
2γ Connect the Mixing console/analog input interface
1) Insert the USB receiver into the USB power supply interface,
and the LED light of the USB receiver will flash for 1 second
before turning off.
2) One end of three 3.5 audio cables is inserted into the 3.5mm
interface at the rear of the USB receiver, and the other end is
inserted into the 3.5mm analog signal input interface of the Mixing
console. (If the interface to the target device is a card head,
phoenix terminal, lotus head, etc., corresponding adapter cables
need to be used)
3)Turn on the power switch of the host, the host and USB receiver
will automatically connect, and the LED light of the adapter will
remain on.