HAS JAMMA extension pickup (rgbslab.com)

Channel:
Subscribers:
3,650
Published on ● Video Link: https://www.youtube.com/watch?v=Wg7XNKROlLM



Duration: 0:00
334 views
24


Description
Hard gold plated JAMMA edge contacts
Built-in dual voltmeter to monitor +5V and +12V; 0.91" white OLED display; +/- 1% tolerance
~68 cm total length (~60 cm cables length)
2x16AWG for GND, 2x16AWG for +5V, 1x18AWG for -5V, 1x18AWG for +12V, 22AWG for everything else
DIP switch to enable/disable button 4, 5, and 6 outputs on the JAMMA connector
Compatible with the HAS dedicated kick harnesses if used with the HAS or devices capable of outputting 6 buttons through the JAMMA connector
Plexiglass case for both ends of the harness (3 mm thick plexiglass cover for top and bottom, spacers and bolts; the case comes unassembled)
HAS dedicated, but can work with other devices


Optional items
CPS-2 kick harness input connector for buttons 4-6 (only needed if your device isn't capable of outputting 6 buttons via the JAMMA connector; not recommended for the Taito Egret cabinets)
TEST and SERVICE buttons (OMRON brand