Hikvision IP Camera how to reset unlock password with TFTP software
66Hikvision IP Camera how to reset unlock password with TFTP software
I bought 3 hikvision cameras but I did not have the passwords, here is how I flashed them and set new passwords using TFTP software.
Firmware: https://us.hikvision.com/en/support-resources/firmware
TFTP FLASHING SOFTWARE:
https://www.mediafire.com/file/3d0doxj5d0hcg4n/Hikvision_Emergency_Firmware_Recovery_TFTP.zip/file
1. Rename the firmware to digicap.dav
2. Put the firmware in the same folder as the TFTP files
3. Set the IP of computer as 192.0.0.128
4. Camera's IP can be anything
5. Run the tftpserv.exe by double clicking
6. Power on your IP camera and plug it into your router using a cable.
7. Please wait until TFTP shows "Device [192.0.0.64] system update completed!" It takes about 5 minutes.
8. Close the TFTP before the camera reboots.
9. IP Camera will restart automatically after upgrading.
Go to the cameras IP address usually 192.0.0.64 using internet explorer and set a new password it must be secure. usually capital letters and small and numbers.
Then set your cam to whatever you wish I ticked DHCP so it is set by my NVR.
Set your PC IP address back to normal
Subscribe for more videos like this:
► http://www.youtube.com/subscription_center?add_user=DAVERUKY
Thanks for watching!
Please leave a like and don't forget to comment and subscribe.