Hello FGC, and people who are interested in fight sticks. I wanted to show you that the Samducksa SDL-301-DX-QR does not fit in the Hori Fighting Stick alpha, even if you were to flatten down the reinforced plastic. I also tried grinding the center portion of the bottom plastic, for the bottom of the stick to clear. I didn't want to break through the plastic bottom so I gave up on it. In the end the stick was still bottoming out and scrapping when pushed down on, and the enclosure was tweaked when I closed it up. Luckily I had other options. Like the Razer Panthera I had, with a Sanwa JLF Detachable stick that has the Otto V5 mod. The Samducksa SDB-202M's fit, no problems. I show you how I take the plunger off and add in Kahuna-SMX inserts for the SDB-202M's. I also go through the process of removing the plexi for the Hori Fighting Stick alpha. On a side note, be careful with 20mm buttons when removing the plunger, the one way plastic clips are very fragile, not as robust as the 30mm. Not quite the results I was looking for, but it all ended finely. Nothing has been sponsored.
57