How to build a Planter from 1"x6"x6' wood fence board
Channel:
Subscribers:
317
Published on ● Video Link: https://www.youtube.com/watch?v=Y0iuFxN2NzM
How to build a wood planter from wood fence board (1"x6"x6') cedar or pressure treated. Includes vapor barrier inside. This wood was selected as it was the cheapest and worked fine for the size. Planter dimension was 2'x4' and total cost was ~$40 per box. Standard size needed 10 fence boards and a deeper version needed 12. Screws used were 1,1/4 or use staples with PL premium glue. Pressure treated wood was used in this case along with end cut treatment where it was cut or where the wood was screwed or stapled to preserve the wood.
Other Videos By Youcando
2023-05-06 | Windshield Washer Pump Repair - Toyota Rav4 2010 |
2020-08-16 | How to build a closet and install a sliding door |
2020-07-21 | How to connect ABS for a kitchen or bathroom sink when plumbing was done wrong (see picture). |
2020-06-16 | EV Pedestrian Warning Sound device explained 2020 Rav4 Hybrid (strange noise when in reverse) |
2020-06-07 | PSP 3001 Review - Need for Speed Underground Rivals startup and gameplay |
2020-05-10 | JS Innovations Dash 3.0 Dash cam Review |
2020-05-06 | How to build a Planter from 1"x6"x6' wood fence board |
2020-04-18 | How to Install Dashcam (2019 - 2020) Toyota RAV4. JS Innovations Dash 3.0 camera. |
Tags:
how
build
planter
cedar
pressure
treated
1x6x6
picket
fence
garden
flower
box