How to Install the Slepnir Drop in Replacement Gearshift for the Steel Battalion Controller

Channel:
Subscribers:
698
Published on ● Video Link: https://www.youtube.com/watch?v=OAIkCWEfvhA



Duration: 0:00
80 views
4


This is a simple youtube video which showcases how one goes about replacing the stock gearshift in a Steel Battalion Controller with a brand new replacement gearshift known as the: "Slepnir Gearshift", which was designed by Harcroft from the Original Xbox Scene.

Timestamps:

0:00 Channel Intro
0:09 Video intro
0:30 Separating the left block from the middle block
0:54 Disconnecting the IDC cable
1:24 Removing the rubber feet and screws from the bottom plate of the left block
3:00 How to take off the bottom plate
3:19 Removing the 16 pin cable from the original gearshift
4:06 Unscrewing the old gearshift
4:25 Placing the two spare screws from the old gearshift back into their original posts
4:48 Connecting the Slepnir Gearshift to the left block via the 16 pin cable
5:20 Placing the magnet holder in the controller
6:30 Screwing the Slepnir board where the last two screws from the old gearshift would have gone
6:41 What it looks like to have the Slepnir gearshift properly installed
6:47 Closing the left block back up and reattaching it to the middle block
8:05 How to access the controller test menu in: Steel Battalion
8:16 How to access the controller test menu in: Steel Battalion: Line of Contact
8:25 Testing the Slepnir gearshift in Steel Battalion's test menu to make sure it works
8:58 Outro