Duration: 0:00

34 views

1

To change the lithium coin battery in a digital bathroom scale, follow these steps:
1. Locate the Battery Compartment
Flip the scale over and find the battery cover.
It’s usually a small plastic or metal compartment on the back.
2. Open the Battery Cover
Slide or pop it open: Some covers slide off, while others have a small latch or screw.
If it has a screw, use a small Phillips screwdriver to remove it.
3. Remove the Old Battery
Use a thin object (like a flathead screwdriver or fingernail) to gently pry the coin battery out.
Take note of the battery's orientation (+ and - sides) before removing it.
4. Insert the New Battery
Insert a new lithium coin battery (usually CR2032 or similar) in the correct position.
Ensure it sits flat and securely in place.
5. Close the Battery Cover
Snap or slide the cover back into place.
If it had a screw, tighten it back.
6. Test the Scale
Place it on a hard, flat surface and step on it to check if it powers on.
If it doesn’t, reset the scale by removing the battery, waiting a minute, and reinserting it. #bathroomscale

Disclaimer: As an Amazon Associate I earn from qualified purchases.