How to Replace MAP Sensor 2011-2018 Ram 1500 3.6L V6
33Buy Now!
New MAP Sensor from 1AAuto.com http://1aau.to/ic/DEEMP00041
This video shows you how to install a new MAP sensor on your 2011-2018 Ram 1500. The Manifold Absolute Pressure (MAP) sensor measures the air coming into your fuel injected engine to determine how much fuel to add to get the right mix. A failing or failed sensor will contribute to rough or inefficient running engines. It will likely also trigger a check engine light. Replacing a failed sensor should be a priority.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• 8mm Socket http://1aau.to/obGg/1AXAA00017
• Gloves http://1aau.to/oa4i/1AXSS00048
• Safety Glasses
• Pick http://1aau.to/o3k/1AXAA00037
Subscribe: https://www.youtube.com/channel/UCVvE8kQTuZEykvMFZBVzftg?sub_confirmation=1
For More Info visit us at http://1aau.to/h/fWQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.