How to Replace Rear Calipers 2012-2018 Nissan Altima
114Buy Now!
New Brake Caliper from 1AAuto.com http://1aau.to/ic/1ABCR00124
This video shows you how to install new rear calipers on your 2012-2018 Nissan Altima. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
Estimated installation time for a professional technician is approximately: 1 hour 0 minutes
This repair was done on a 2013 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima
🔧 List of tools used:
• 14mm Wrench
• 8mm Wrench
• 12mm Socket
• 14mm Socket
• 19mm Socket
• 21mm Socket
• Pliers
• 1/2 Inch Impact Gun
• Torque Wrench http://1aau.to/obSo/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Gloves http://1aau.to/ockB/1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• Floor Jack
• Jack Stands
• Wheel Chocks
Subscribe:    / @1aauto Â
For More Info visit us at http://1aau.to/h/how/
âš DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.