Install Windows 10 or 11 on Raspberry Pi Easily with WoR flasher
8#RaspberryPi #Windows #WoRFlasher
Full steps can be found at https://i12bretro.github.io/tutorials/0610.html
--------------------------------------------------------------------
Things You Will Need
--------------------------------------------------------------------
- A USB flash drive at least 32 GB https://amzn.to/3qkrJ1p | https://amzn.to/3Nhu9b9
--------------------------------------------------------------------
Flashing Windows
--------------------------------------------------------------------
01. Log into a Linux device (this can be a Raspberry Pi or any other Debian based Linux device)
02. Plug in the target USB flash drive
03. Run the following commands in a terminal window
# update software repositories
sudo apt update
# install git if not already installed
sudo apt install git -y
# clone the wor-flasher github repository
git clone https://github.com/Botspot/wor-flasher ./wor-flasher
# run the wor-flasher GUI
./wor-flasher/install-wor-gui.sh
04. The WOR Flasher GUI should load
05. Select a version of Windows and the target Raspberry Pi model ≫ Click Next
06. Select the language for the Windows installation ≫ Click Next
07. Select the target device to write Windows to ≫ Click Next
NOTE: Double check that you select the correct device as all data will be overwritten on it
08. Review the overview screen
09. If everything looks correct click Flash
10. A new terminal window will run and Windows will be downloaded and flashed to the target device
11. Once the flash completes, either safely remove the USB flash drive if flashing from a different device or shutdown the Raspberry Pi if running from the Pi directly
--------------------------------------------------------------------
Booting Windows on the Raspberry Pi
--------------------------------------------------------------------
01. Remove all other bootable USB/MicroSD devices from the Raspberry Pi and insert the flashed Windows USB flash drive device
02. Power on the Raspberry Pi
03. The Windows Setup dialog should display
04. Select the edition of Windows ≫ Click Install
05. Windows Setup will complete and reboot when completed
06. After booting back up answer the sysprep questions
07. Welcome to Windows 10 or 11 running on Raspberry Pi
Source: https://github.com/Botspot/wor-flasher
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro