Motherboard GIGABYTE GA-H77-D3H updating and backup (save) the BIOS with the Q-Flash Utility
4#Motherboard #GIGABYTE GA-H77-D3H #updating and backup (save) the #BIOS with the Q-Flash Utility
💰 DONATE - https://lnnk.in/jjd5 💰
#DOWNLOAD BIOS:
version F6 - https://t.me/iMobilo/1176
version F11 - https://t.me/iMobilo/1177
version F14 - https://t.me/iMobilo/1178
version F15 - https://t.me/iMobilo/1179
version F16b - https://t.me/iMobilo/1180
manual - https://t.me/iMobilo/1181
archiver program for unpacking files - https://youtu.be/IZQFyVSawKE
if you need to install the telegram to download files - https://youtu.be/FgxprpRpcjg
#Instructions "Before You Begin"
1. Extract the file and save the new BIOS file (e.g. Z77D3H.F1) to your USB flash drive or hard drive. Note:
The USB flash drive or hard drive must use FAT32/16/12 file system.
2. Restart the system. During the POST, press the "End" key to enter Q-Flash. Note: You can access Q-Flash
by either pressing the "End" key during the POST or pressing the "F8" key in BIOS Setup. However, if the
BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to an independent
SATA controller, use the "End" key during the POST to access Q-Flash
#Instructions "Updating the BIOS"
In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the
BIOS, choose the location where the BIOS file is saved. The following procedure assumes that you save the
BIOS file to a USB flash drive.
Step 1:
1. Insert the USB flash drive containing the BIOS file into the computer. In the main menu of Q-Flash, select
Update BIOS From Drive.
Step 2:
The process of the system reading the BIOS file from the USB flash drive is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, select Yes to begin the BIOS update. The monitor will
display the update process.
Step 3:
When the update process is complete, select Reboot to reboot the system
Step 4:
During the POST, press "Delete" to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit
screen and press "Enter" to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,
so we recommend that you reload BIOS defaults.
Step 5:
Select Save & Exit Setup and press "Enter". And then select Yes to save settings to CMOS and exit BIOS
Setup. The procedure is complete after the system restarts
#What is Q-Flash™?
With Q-Flash you can update the system BIOS without having to enter operating
systems like MS-DOS or Window first. Embedded in the BIOS, the Q-Flash tool
frees you from the hassles of going through complicated BIOS flashing process
autoexec.bat, Efiflash.exe, H77D3H.16b, H77D3H.F06, H77D3H.F11, H77D3H.F14, H77D3H.F15