NanoPi M4 6 Core SBC - Overview - Android BenchMarks - Gaming Test
1,721In this video, I take a look at the NanoPi M4 from Friendly Elec otherwise known as Friendly Arm. And run some test on a build of Android 7.1.2 8.1 is available but the play store is not accessible at this time.
6 Core CPU 4 USB 3.0 ports Wifi Bluetooth all the same Raspberry Pi For Factor!
More info here: https://www.friendlyarm.com/
buy a Nvidia Shield on Amazon: https://amzn.to/2RExgMD
💙Twitter: https://twitter.com/theetaprime
💙 Become a Patron: https://www.patreon.com/ETAPRIME
💙 Support The Channel: Paypal - http://bit.ly/2gy2ffr
💙 Facebook Group: https://bit.ly/2rkuKPK
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
Nano Pi M4 Full Specs:
CPU Model: Rockchip RK3399
Number of Cores: 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53
Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz)
GPU Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
VPU 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
Memory Dual-Channel 4GB LPDDR3-1866 / Dual-Channel 2GB DDR3-1866
Storage eMMC: no Onboard eMMC, but has a eMMC socket
MicroSD Slot: MicroSD*1 for external storage up to 128GB
Connectivity Ethernet: Native Gbps Ethernet
WiFi: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
Antenna*2: IPX Connector
Audio Audio Output: 3.5mm Dual channel headphone jack, or HDMI
Audio Input: microphone input interface*1
Video Input one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
Video Output HDMI*1: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
4-Lane MIPI-DSI*1
USB USB 3.0*4: USB 3.0 Type-A ports
USB Type-C*1: Supports USB2.0 OTG and Power input
USB Host*2 (included in GPIO2 2.54mm pitch pin header)
Pin-header GPIO1: 40pin, 2.54mm pitch pin-header
3*3V/1.8V I2C, up to 1*3V UART, 1*3V SPI, 1*SPDIF_TX, up to 8*3V GPIOs, 1*1.8V 8 channels I2S
GPIO2: 24pin, 2.54mm pitch pin-header
2 independent native USB 2.0 Host interfaces, PCIe x2, PWM*1, PowerKey
Serial Debug Port: 2.54mm pitch 4-pin-header, 3V level, 1500000bps
LED Power LED(Red)*1
GPIO Controlled LED(Green)*1
Others RTC: 2 Pin 1.27/1.25mm RTC battery input connector
Working Temperature: -20℃ to 70℃
Power DC 5V/3A
OS Support Android 7.1.2
Lubuntu 16.04 (32-bit)
FriendlyCore 18.04 (64-bit)
FriendlyDesktop 18.04 (64-bit)
Kernel version Linux-4.4-LTS
U-boot-2014.10
PCB 8 Layer
Dimension 85*56mm
Weight 47.70g DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video