Nofrendo NES emulator ported to the TTGO T-Display ESP32 [Fix Bad Audio 🔊]
77#TTGO #T_Display_ESP32 A Tiny ESP32 Handheld #NES_Emulator
Special thanks to ✨ 無限升級 ✨
= Modified Code BY =============================== https://github.com/channel2007/TTGO_FC
Youtube: (無限升級) https://youtu.be/1TspP-tZocc
==================================================
Main Project : 【參考資料】
-本專案修改自陳亮老師的GitHub專案
https://github.com/moononournation/arduino-nofrendo
==================================================
Reference:
https://github.com/espressif/esp32-nesemu.git
===================================================
if you enjoyed those videos, then please subscribe to my channel which I update every week
👉 Subscribers : https://bit.ly/2EpEwrU
===========
= Hardware =
============
TTGO T-Display ESP32
PAM8302 audio amplifier
Push Switches opening 6x6x4.3 (x8)
10k Ohm (x5)
breadboard
===========
= schematic =
============
https://raw.githubusercontent.com/channel2007/TTGO_FC/main/image/circuitDiagram.png
=======================
= Precompiled firmware. =
=======================
https://github.com/channel2007/TTGO_FC/tree/main/firmware
===============================
= Flashing TTGO T-Display ESP32 =
===============================
esptool for macos Easy Installation
You will need either Python 2.7 or Python 3.4 or newer installed on your system.
To install esptool, run the following command in macOS terminal (Applications-Utilities-Terminal) Install command:
brew install esptool OR. pip install esptool
Commands
Write binary data to flash: write_flash
esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xe000 boot_app0.bin 0x1000 bootloader_dio_80m.bin 0x10000 ttgo_t_display_fc.bin 0x8000 ttgo_t_display_fc_partitions.bin
===========================================
= Install ESP32 Filesystem Uploader in Arduino IDE =
===========================================
https://randomnerdtutorials.com/install-esp32-filesystem-uploader-arduino-ide/
-------
========================================
UPLOAd the NES ROM from data folder data
PUT your NES rom here :
TTGO_FC-main/esp32-nofrendo/data/rom.nes
then goto esp32-nofrendo.ino click on it , then you will see Arduino IDE
click Tools then esp32 sketch data upload to upload the NES rom to TTGO T-Display
------------------------------------------------------------------------
About Social Media, Business, and Blogging
------------------------------------------------------------------------
https://www.youtube.com/djamaluk
https://www.facebook.com/Djamal.UK
https://twitter.com/DjamalUK
https://Djamal.UK
Code and Schematic OR Any Questions Please let me know in the comment section below
Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!