PC UEFI BIOS Update from F12C to F13 in AORUS Z370 GAMING 7 SERIES
4Well Hello There, IKR No one Missed me, I am QualCorpAorus 9S Omar Legion, So Its a Short video that How to UPGRADE your GAMING PC BIOS to LATEST VERSION, I'D have to DO IT to run DmC Devil May Cry 5 which also fixed kind of problems. and increased 2% Performance. This is for GIGABYTE AORUS INTEL 300 PCs WHO MADE IN AORUS SERIES WHICH USES Q-FLASH and USB 3.0,
NOTE: DO NOT APPLY THESE BIOS FILE TO YOUR NORMAL BUSINESS PCs or OTHER BRAND PCs, IT HAS DIFFERENT METHODS. EVEN IF ITS USES USB METHODS
Here is BIOS file for Aorus Z370 Gaming 5, 7 Series.
https://www.gigabyte.com/Motherboard/Z370-AORUS-Gaming-7-rev-10#support-dl-bios
1. DOWNLOAD FILE
2. YOU MUST OWN A USB 3.0 ,
3. IF YOU HAVE ANY DATA BACKUP IN PC BEFORE THIS WORK,
4. When Done. FORMAT USB to FAT32
4. COPY BIOS FILE TO USB DRIVE.
5. DO NOT RENAME ANY FILES PLEASE, IT WILL BE MESS IF YOU DO IT, KEEP AS-IS.
and other PROCESS is in VIDEO WATCH IT FULLY.
NOTE: WHILE UPDATING, DO NOT UNPLUG USB OR TURN OFF PC OR CANCEL THE PROCESS, YOUR PC WILL BECOME USELESS IF YOU DO THAT AND I AM NOT RESPONSIBLE FOR THAT, ONLY YOU ARE ONE. IF YOU DON'T KNOW, TAKE PC TO KNOWN TECHNICIAN WHO CAN DO IT FOR YOU.
SAFETY TIPS (WHO HAS ELECTRICITY PROBLEMS):
IF your place do not have constant electricity and it not stays or goes out anytime (Load-shading or Thermal Event),
DO NOT START UPDATE BIOS IF CONDITIONS ARE THESE, ELECTRICITY IS UN-TRUSTED FOR THIS CONDITIONS.
BEFORE PREPARING TO UPDATE BIOS OF YOUR PC, MAKE SURE EVERY THING IS GOOD:
1. USE ELECTRIC GENERATOR (NOT RECOMMENDED IF IT HAS PROBLEMS, DO NOT USE IT, FIRST REPAIR GENERATOR). 2.5kW GENERATOR is RECOMMENDED. ELSE DO NOT USE IT.
Generator Tips:
1.1. USE 1.5 Litres PETROL INSTEAD OF SUI GAS. The CONSTANT ISOLATED ELECTRICITY FROM ALTERNATOR IS NECESSARY.
1.2. SERVICE THE CARBURETTOR AND CHANGE THE COMBUSTION PLUG IN YOUR GENERATOR.
1.3. CHECK ENGINE OIL LEVEL, ITS COLOUR, CHANGE THE OIL IF ITS LOW AND BLACKENED.
1.4. YOU CAN KEEP FAN, LIGHT ON, ALL HEAVY APPLIANCES MUST BE STAYED OFF, LIKE WASHING MACHINE, FRIDGE, DEEP FRIDGE, ELECTRIC MOTORS PUMPS, BLOWERS, VACUUM CLEANERS, MICROWAVE OVENS OR CRT TVs. THEY ARE QUITE HEAVY LOAD THEN PC.
1.5. Once all things are set. Turn On PC and Start Backup of BIOS FIRST. by selecting "END" Button.
1.6. Then Upgrade THE BIOS , WITH FILE "Z370.G7.F13"
NOTE: YOUR PC WILL REBOOT 4 to 5 times. Because it is updating BIOS and RESET SETTINGS and THEN IT WILL AUTOMATICALLY BACK TO ITS OLD SETTINGS.
REMEMBER DO NOT MIX IT OR SELECT THE WRONG FILE, FILE NAME WILL END ".FNumber", Like ".F11, .F12" IT WILL END with EXTENSION Z370.G7.F12 (BACKUP) in your case it will be different. Like Z370.G7.F10 or something . Use High Number file in end. Anyways I'll Tell you when it comes again in later.
NOTE: GENERATOR USES DO NOT TURN ON ANY HEAVY APPLIANCES AND HALT (STOP) OTHERS TO NOT TURN ON ANYTHING JUST SAY THEM TO KEEP PATIENT, IT IS JUST 15 Minutes - 30 Minutes process.
OR
2. USE ELECTRIC UPS (RECOMMENDED) IF YOU HAVE. BEFORE UPDATING PC BIOS:
2.5kW or 3.5kW UPS is RECOMMENDED.
UPS TIPS:
2.1. Make Sure UPS battery have 80% Charge, AND BATTERY MUST BE IN GOOD SHAPE.
2.2. MAKE SURE UPS BATTERY WATER IS IN PROPER LEVEL SO CHARGE CAPACITY REMAINS CONSTANT. AND ITS CONTACT MUST NOT ROT OR HAS ANY KIND OF GUNK.
2.3. Your UPS MUST BE CLEAN AND HAS NO FAULTS IN IT, IF IT DOES, FIRST REPAIR THE UPS.
2.4. If UPS BATTERY FAILS CONSTANTLY OR DO NOT KEEP CAPACITY, REPAIR OR REPLACE THE BATTERY.
2.5. Turn Off All Appliances, Equipment and Lights and Fans. UPS are WEAK DEVICE, IT DO NOT SUPPORT HEAVIER LOAD LIKE ELECTRIC GENERATOR DO.
2.6. Turn On PC and BACKUP OLD BIOS FIRST by selecting "END" Button
2.7. Start Updating BIOS with FILE "Z370.G7.F13"
REMEMBER DO NOT MIX IT OR SELECT THE WRONG FILE, FILE NAME WILL END ".FNumber", Like ".F11, .F12" IT WILL END with EXTENSION Z370.G7.F12 (BACKUP) in your case it will be different. Like Z370.G7.F10 or something , Use High Number file in end. Anyways I'll Tell you when it comes again in later.
NOTE: YOUR PC WILL REBOOT 4 to 5 times. Because it is updating BIOS and RESET SETTINGS and THEN IT WILL AUTOMATICALLY BACK TO ITS OLD SETTINGS.
NOTE: ELECTRIC UPS USERS, DO NOT TURN ON ANY APPLIANCE AND HALT (STOP) AND ADVISE OTHERS TO NOT TURN ON ANYTHING, AND KEEP IN PATIENT, IT IS JUST 15 Minutes - 30 Minutes process.
To TURN OFF RGB FUSION IN BIOS, I'll MAKE ANOTHER VIDEO HOW TO DO IT.
AND THAT IS ALL FOR TODAY, THANKS FOR WATCHING AND HAVE A NICE DAY.