QNAP TS-664, QM2-2P10G1TB, ASUS XG-C100C, 10GbE Ethernet Budget Setup with NO SWITCH, speed test
In this video I test the QNAP TS-664 6 bay NAS with a QM2-2P10G1TB and PC with ASUS XG-C100C connected with a single cable without the need for a switch. A normal cable can be used it does not need to be a crossover cable the card can manage this itself. The connection is via an RJ45 lan cable, in this video I used an Amazon Basics Cat 7 ethernet cable, though you can use CAT 6 or CAT 5e cable which should both be fine over short distances but make sure to check distance supported by each depending on your setup.
I also test the QNAP card with cache and find some interesting results when playing with the cache setup in different configurations, this includes the following cache setups:
- 1 x NVME SSD single drive cache on QM2-2P10G1TB
- 2 x NVME SSD RAID 1 cache on QM2-2P10G1TB
- 2 x NVME SSD RAID 1 cache on, 1 SSD QM2-2P10G1TB and 1 SSD on the NAS NVME Slot.
Feel free to ask any questions, Thanks for watching.
Other Videos By TKsTechTalk
2023-07-26
QNAP TS-664, QM2-2P10G1TB, ASUS XG-C100C, 10GbE Ethernet Budget Setup tutorial NO SWITCH, speed test
45