RX 6600 Mining OC Setting - Hashrate 29MH/S on NiceHash
RX 6600 SWIFT XFX MINING SETTINGS ON NICE HASH
21.10.2 Driver
How to Get 29.10Mh/s to 29.20Mh/s
Before recording its's 29.10mh/s-29.20 mh/s
Im recording Right now so im losing about 0.30-0.50Mh/s
DaggerHashimoto GMinerCuda9.0+ is best
DaggerHashimoto SRBMiner gives the same rate but dosen't show wattage or fan speed so i will be using GMinerCuda9.0+
Settings :
Core Clock to the lowest. Some brands coreclock is 1385 and that's fine u will get the same hashrate
Memory Clock just set it to the Max.
-Increasing the core clock will not increase hashrate at most only 0.10mh/s
-Powerlimit -6% or +0% is best, Setting it to the max +20% power limit helps with almost no change in mh/s .
For -6% or +0% after a few minutes both of it will be at 59w-60w.
There is no difference in wattage for -6% or +0% , so i'll just set it to +0%
My Room Temp is at 29c-30c 45% humitiy
MSRP
RTX 2060 is $299USD , 38.43 mh/s for 124W -High Temp at 68c to 72c at room temp.
( Need to have a low room temp for temps to be Lower )
RX 6600 is $329USD , 29.20 Mh/s for 59W -Low Temp of 60c at room temp
0.03280-0.03347 mBTC/ Day $2-$2.08 USD - Will just round it down to $2 USD
Got the RX 6600 at $599 USD - $2usd/day
$2USD*30 Days*6 Months = $360 USD ( Break even at 6 Months )
$2USD*30 Days*8 Months = $600 USD ( To break even u need 8months+ )
If anyone of you have a better hashrate/settings for overclocking do leave them down in the comment below.
#NICEHASH #GPUMINING #RX6600 #BITCOIN #MINING