Soldering for Stereo - the making of a custom cable.

Channel:

Elbobelo

Subscribers:

94

Published on November 20, 2022 1:12:21 PM ● Video Link: https://www.youtube.com/watch?v=xd9x5NnlMAI

Duration: 15:30

83 views

6

If you have a Genesis Model 2 RF cable. You can open up the RF box, remove the 4 wires, and solder them to an AV connector. Now you have a Stereo AV cable.

Let's perform this mod outside in my garage ventilated by the cold autumn air.

[00:00] Intro
[00:23] Cartridge slam
[00:35] Comparing 2 "Genesis Model 2" cables AV cables.
[01:00] The RF Modulator mixed the video and audio signals.
[01:14] How I modified the RF Box to include a headphones jack, volume wheel, and video.
[02:09] Then I removed the wires from the RF box and soldered them to an AV connector.
[02:31] Showing different switch box connectors.
[03:04] Testing the broken connector. "What works?"
[04:24] Heating up the soldering iron.
[04:37] The iron is melting the solder "close up."
[05:00] Removing the RED audio wire. 🔴
[05:24] Removing the YELLOW video wire. 🟡
[05:34] Removing the GROUND wire. 🟢
[06:20] A look at the detached wires.
[06:34] Getting our new connector ready.
[07:20] "C'mon, stick on there Mr. Solder"
[07:30] "I melted the plastic"
[07:46] Soldering the YELLOW video wire. 🟡
[08:39] Soldering the RED audio wire. 🔴
[10:52] Soldering the WHITE audio wire. ⚪
[12:11] Soldering the GROUND wire. 🟢
[13:52] Testing the new Stereo AV cable!
[14:57] Taping the wires with electrical tape to guitar music.

Thanks for watching.
Edited with HITFILM

#sega #soldering #segagenesis #segamegadrive #retrogaming #electronic #repair