噴漆沒噴完鐵罐式的噴漆還有剩該怎麼辦，教你一妙招隔絕空氣 There is still paint left, teach you to isolate the air (Eng subtitles)
1錫罐裡還有噴漆怎麼辦，教你如何隔絕空氣，可以保存幾個月
What to do if there is still spray paint in the tin can, teach you how to isolate the air
圖文教學 https://zfly9.blogspot.com/2021/11/12fl0b6e71tx.html
別忘了按讚及訂閱，還有點擊分享，用到您自己的FB等網路通訊平台
窮到發慌，沒錢了快餓死，如果可以的話，請捐款錢給我
維持該YT頻道能夠正常運作，您可以斗內捐款一些錢給我
https://zmarkchang.blogspot.com/2019/07/donate.html
Please donate to me if you can, thank you very so much
https://zmarkchang.blogspot.com/2019/07/donate.html
Your donation helps keep my YouTube running
This kind of [tin can type spray paint]
這種[鐵罐式的噴漆]
What to do if you have leftovers and not finished spraying
如果還有剩，沒有噴完，該怎麼辦
This section will teach you a trick
這段將教大家一個妙招
cut off the air
隔絕空氣
The third item, using a small amount of multiple sprays
第三項，採用少量多次噴法
It is recommended that you every 30 minutes or more
這邊建議大家每隔30分鐘以上
Spray a thin layer each time, the effect is better
每次噴上薄薄的一層，這樣子的效果，比較好
It is recommended that you use a small amount of spraying method
這邊建議大家採用少量多次的噴法
More than 30 minutes apart each time
每次約間隔30分鐘以上
Just spray a thin layer every time
每次都噴上薄薄的一層就好
This small amount of spraying method, the effect will be very good
這樣少量多次的噴法，效果會非常的好
After the target is sprayed, there is still paint left
目標物噴完了之後，噴漆還有剩下
Don't just close the lid
不是闔上蓋子就好喔
Because more or less still comes into contact with the air
因為多多少少還是會接觸到空氣
The most important is the part of the nozzle
最主要是這個噴嘴的部分
is not in contact with any air
是不可以接觸到任何空氣
Otherwise the paint inside will harden
要不然裡面的漆料會硬化
will cause the nozzle to clog
會造成這個噴嘴去堵住
First you have to prepare some [hydroelectric tape]
首先你要準備一些的[水電膠帶]
Then tear off the [hydroelectric tape]
然後將[水電膠帶]撕開
Wrapped in the gap between the lid and the tin can
纏繞於蓋子與鐵罐之間的縫隙
This completely isolates the air
這樣就可以完全的隔絕空氣
I have used this method for many years
這個方式我使用了很多年