1/72 Demon Destiny Gundam "Kamaitachi" by Vientiane Toys
270Check out Bradon's group: https://www.facebook.com/groups/SupremeCollectorBST/
Few things I've noticed:
- LED unit for the head uses 2x AG4/LR626 batteries (not included). I used LR621 and worked fine.
- Make sure to put the LED module withe the arm stand before attaching Kamaitachi. LED module uses 3xAAA batteries (not include).
- Make sure the connection of the flex connector is flushed into the LED Base for it to work. Likewise, it's difficult to separate and take it out. I'm not sure if pulling will damage the connector. I wedge a flat screw driver to push the connector out, this does create marks.
- Same issue with removing the arm on the base, you need to push both tabs in from the bottom side then pull. I end up using a flat screwdriver to wedge out one side at a time.
- The "Dainslef" (cross-bow spike launcher) spike loosened on mine and falls off when mounted on the back. Quick and removable fix is to add painter's tape (Blue tape) inside. I rolled it with adhesive out on a toothpick and work my way on unwinding inside the tube near the inlet. it will get pushed down once you put the spike on.
Follow my updates at FB: https://www.facebook.com/meadscollection
https://www.instagram.com/meadeslemicah/