Add 800+ Games NOW to Sega Genesis Mini with True Blue Mini UltraDrive
How to add 800+ games to your Sega Genesis Mini with True Blue Mini Genesis UltraDrive.
Where to buy: https://www.ploylab.com/h-product-detail.html?goods_id=888999
True Blue Mini website: https://www.truebluemini.com/trueblue-genesis/
For product reviews or other Business related stuff I can be reached at cliffscast@gmail.com
Find me on Patreon: https://www.patreon.com/8_Bit_Flashback
Find me on Facebook: https://www.facebook.com/eightbit.flashback.1
Help support the channel here-donations:
https://www.paypal.me/8bitFlashback
How to use True Blue Mini:
Perform the One-Time-Install process on each console you want to use True Blue with.
Plug True Blue Mini USB device into the LEFT USB port on the front of the console
Plug the Hub into the right USB port on the front of the console.
Plug the Control Pads into the Hub.
Special buttons for use on the game select menu:
Press C to return to root game menu.
Hold Left or Up and press C to go to the previous game menu page.
Hold Right or Down and press C to go to the next game menu page.
Press B to change the theme between Genesis and Mega Drive.
HOW TO CHANGE BETWEEN BOOTING IN TRUE BLUE MODE OR ORIGINAL MODE:
The One-Time Install process adds the ability to boot in one of two boot modes, these are:
The True Blue Hacked mode.
The Original Unhacked mode.
After install the default mode will be True Blue Hacked mode. The console will continue to boot in this mode until the mode is changed by the user.
When booting in this mode the True Blue device must be plugged into the front left USB port.
To toggle between the two boot modes do the following steps:
The initial One-Time Install needs to have been done.
The Console must be powered off, with the red light off.
The USB cable can be unplugged to force it to power off.
Hold the RESET button on Console and turn on Power Switch.
Continue to hold RESET for 5 seconds until the light flashes quickly, then let go.
If RESET is held for too long the light will flash slowly indicating it is in install mode. If this occurs turn off the power switch, unplug the USB cable and try again.
The console will boot into its new mode once you let go of RESET. It will continue to boot in this mode until the user changes the mode by following these steps again.
Note: Due to emulation some games may not play correctly.