Arduboy display chip select using PNP transistor
Channel:
Subscribers:
2,370
Published on ● Video Link: https://www.youtube.com/watch?v=ScCT8xCNRJg
When making an homemade Arduboy using a Pro Micro with standard wiring, there is no display chip select available. A workaround is to connect the display chip select to GND.
However when adding a flash chip this is not an option.
One of the possible solutions is to create a display chip select using a general purpose PNP transistor to invert the flash chip select.
* connect transistor emitter to VCC
* connect transistor base to 470 to 1K resistor (Depends on transistor) and the other end to flash chip select
* connect transistor collector to display chip select and to 1K resistor
* connect other end of 1K resistor to GND
Other Videos By MstrBlinky
Tags:
Arduino
Pro Micro
Arduboy
Flash chip
FX
Transistor inverter
DIY
homemade