Arduino (DAOKI Uno) Case Installaton Instructions

Channel:
United States Ace1000ks1975
Subscribers:
12,500
Published on ● Video Link: https://www.youtube.com/watch?v=S3R5tZ-4oTA


Category:
Tutorial
Duration: 1:42
75 views
2

Tools and Parts:

1. #00 phillips head screw driver
2. 4 plastic washers that go under the board.
3. 4 long screws that go through the lower and upper cover plate.
4. 4 short screws that go through the lower case cover and the Arduino board.
5. 2 slide plates.
6. 1 back cover plate.
7. 1 front cover plate.
8. 8 screw nuts for the 8 screws.
9. Top cover plate.
10. Base or bottom cover plate.

4. 8 nut screws. 4 of them are used to fasten the board to the lower
This is the most inexpensive case for the Arduino Uno, it costs about $5 on Amazon. The other cases I saw there cost anywhere from $8.00 to $20.00. My Arduino Uno came with the case, but it wasn't assembled with the board. The instructions for the case installation was inadequate. I played around with it, and I assembled it.

The most difficult part of the installation was putting the screw nuts on top of the Arduino board. You can do this with your finger nails.

Procedure:
1. Align the holes with the bottom cover plate with the holes on the Arduino board.
2. Put the front cover on the bottom cover plate. When you put the Arduino board, the usb port and power port will be over the front cover ports.
3. Put the short screws through the plastic washers on the bottom of the Arduino board.
4. Put the 4 nut screws on top of the short screws you put on top of the Arduino board.
5. Hold the nut screws in place as you use the #00 screw driver to tighten the short screws to the nut screws. Don't over tighten. Just make sure it is firmly on.
6. Put the two sides onto the bottom case cover.
7. Put the bottom side cover on the bottom case cover.
8. Put the top cover on.
9. There will be 4 long screws that will align from the bottom cover plate to the top cover plate. Put all 4 screws through the bottom cover plate to the top cover plate.
10. Put the nut screws over all 4 long screws and tighten it. Don't over tighten the long screws to the nut screws.

You can buy this case at Amazon

♦ DAOKI Uno R3 Case Enclosure
• https://amzn.to/2UlkuqI



Other Videos By Ace1000ks1975


2018-04-25Dell Precision T5500 Gaming Benchmarks with Two Xeon X5675s and a PNY Geforce GTX 1060 6 gbs
2018-04-22MSI Ge70 Apache Pro 012: How to Reapply Thermal Paste and Test
2018-04-21Rome Total War 2 Parthian Cavalry Army vs Roman Army
2018-04-21Total War: Rome II Parthian Cavalry vs Roman Cavalry
2018-04-21Akkanbeder (1995) Arcade Taito
2018-04-21Saboten Bombers (1992) Arcade NMK Tecmo
2018-04-21Meta Fox (1989) Arcade Seta
2018-04-21Rollergames (1991) Arcade Konami Complete Playthrough
2018-04-21Metal Black (1991) Taito Arcade
2018-04-21Total War: Rome II Parthian Slingers and Archers vs Roman Infantry
2018-04-19Arduino (DAOKI Uno) Case Installaton Instructions
2018-04-16Dosbox 0 74 Using a generalized conf file for specific hardware
2018-04-16Manage Windows Credentials for Windows 7
2018-04-15Metal Slug 5 (2003) SNK Playmore Complete Playthrough
2018-04-15Metal Slug 4( 2002) Playmore Complete Gameplay
2018-04-15Metal Slug 3 (2000) Arcade Complete Playthrough
2018-04-14Dell Precision T5500 Dual CPU X5675 Video Editing
2018-04-14Metal Slug 1 (1996) Neo Geo Arcade Complete Playthrough
2018-04-12Windows Fax and Scan: The message could not be sent. The media is write protected Error Fix
2018-04-09Speculation vs Investments
2018-04-09Hostgator 2018: How to Get to PHPMyAdmin and File Manager