Attiny Arcade keychain game #DIY #ATtiny85
This #ATtiny85 - based Microchip ( Atmel AVR) IC and a 128x64px OLED display. Play Stacker and UFO Escape game 2 in one Chip only one ATtiny85 and is #Arduino IDE compatible (you will need an Arduino Uno, a #breadboard, a 10 uf capacitor and some wires to flash your own Arduino sketches.)
THINGS USED IN THIS PROJECT
++++++++
Software:
++++++++
Download the Arduino IDE 1.8.5
https://www.arduino.cc/en/Main/Software
( ATtinyCore ) http://highlowtech.org/?p=1695
Library SSD1306 https://github.com/Defragster/ssd1306xled
+++++++++
Hardware:
+++++++++
PCB Circuit board
DIP8 socket
Attiny85
OLED screen
4 pin header
Battery holder
2x resistors
2x buttons
Piezo speaker
3D printed case ( 3D Printing Service: from £0.99 !!! )
https://www.ebay.co.uk/usr/pri-cut-services
++++++++++++++++++++++++
Buy AttinyArcade DIY game kit
++++++++++++++++++++++++
https://www.tindie.com/products/webboggles/attinyarcade-diy-game-kit/#product-description
++++++++++++++++++++++++++++++++++++++
Original code and Schematic . Special Thanks to
++++++++++++++++++++++++++++++++++++++
Ilya Titov https://twitter.com/webboggles
https://youtu.be/iT9dfrffQh4
Code and more details on webboggles.com
and
Andy Jackson https://twitter.com/andyhighnumber
https://www.youtube.com/user/andyhighnumber/
https://github.com/andyhighnumber/Attiny-Arduino-Games
Attiny Arcade Enclosure by Peter Coyle
https://twitter.com/PeterSimonCoyle
https://www.thingiverse.com/thing:2938160
++++++++++++++++++++++++++++++++++++++++++++++++++++
Big Thanks to
Adrian Pri-Cut . ( Cheapest Affordable 3D Printing Service in The UK From £0.99 )
For Orders: https://www.ebay.co.uk/usr/pri-cut-services
https://www.facebook.com/PriCutServices
Email: pri_cut@yahoo.com
++++++++++++++++++++++++++++++++++++++++++++++++++++
for a schematic ? or You have Any Questions, Please Just Let me know in the comment below
Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!