Checkmate Display Test 29 | Analogue Super Nt-Super Famicom With HDMI
3Testing the many inputs of this versatile monitor. This time with a standard Analogue Super Nt-Super Famicom Edition with a standard HDMI cable connnected to one of the HDMI inputs on the Slot Zero board. Audio is set to 25% on the monitor.
What device and type of input would you like to see?
There is also an HDMI output on this monitor which I will be testing later.
I am trying to understand and adjust screen/video settings better now, with so many devices, resolutions and setting options it can be confusing. So see below for some settings changed on the monitor and device for this test. My aim usually when adjusting settings is to get the image to roughly fill the screen as much as possible while still preserving the aspect ratio so it does not look stretched in either direction. I may do part 2 tests for any device test where myself or others can point out a mistake or a better /correct setting to use. Helpful comments are always welcomed.
Monitor Settings: 4:3
Super Nt-Super Famicom Edition Settings: Height = 4.5 x, Advanced Width = Maximum at 1920