DIY Handheld Console Gamemaker Revision ATmega328P「 Gamebuino | MAKERbuino 」Compatible Clone
Based on #Atmega328 avr microcontroller, a #Arduino programmable Gameboard that you solder and program yourself.
You can play games or interface with it. It's a DIY kit version of the original #Gamebuino board with some modifications and enhancements.
If you enjoyed those videos, then please subscribe to my channel which I update every week
👉 Subscribers : https://bit.ly/2EpEwrU
Full schematic included
http://legacy.gamebuino.com/wiki/index.php?title=MAKERbuino:_build_guide
Hardware
========
ATmega328P-PU microcontroller x1
Nokia 5110 graphic LCD x1
Li-Po charger board with micro USB port (TP4056 charging circuit)
Lipoly battery or samsung battery , 3.7V, 600mAh x1
16Mhz crystal x1
3.3v voltage regulator x1
I2C pin headers x2
3.5mm headphone jack x1
2N2222A NPN transistor x1
100uF capacitor x3
100nf capacitor x2
22pf capacitor x2
100Ω resistor x1
10kΩ resistor x2
4.7kΩ resistor x2
2kΩ resistor x1
1KΩ Trim pots x2
1N4148 diode x1
SD socket x1
Micro SD Card x1 with adapter
12x12x7.3mm Pushbuttons x7
8Ω 0.5W 36mm speaker x1
ISP port header pins x1
================================
== How to Burn the Bootloader ==
================================
Download and install the Arduino IDE
1) Copy the contents of this folder into a new folder in Arduino/hardware\arduino\bootloaders\gamebuino_boot
2) Connect a programmer (or Arduino as ISP) to the target Gamebuino device.
3) Burn the bootloader into the Gamebuino:
- Restart the Arduino IDE
- Select Tools - Board - Gambuino
- Select your programmer's COM port from Tools - Serial Port
- Select the appropriate programmer e.g. Tools - Programmer - Arduino as ISP
- Select Tools - Burn Bootloader
=============
== Credits ==
=============
Gamebuino handheld designed by rodot (http://gamebuino.com/)
------------------------------------------------------------------------
About Social Media, Business, and Blogging
------------------------------------------------------------------------
https://www.youtube.com/djamaluk
https://www.facebook.com/Djamal.UK
https://twitter.com/DjamalUK
https://Djamal.UK
Code and Schematic OR Any Questions Please let me know in the comment section below
Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!