DIY UNIVERSAL SIMRACING STEERING WHEEL
Turn on subtitles for instructions!
Thanks for watching, this addon has 10 buttons and paddle shifters. The steering wheel is universally applicable in many types of races and works very well with most cars. Make your own, good luck!
Check all my projects on my website:
https://www.projectnextrace.com/universal-button-plate
Instagram:
https://www.instagram.com/projectnextrace/
Facebook:
https://www.facebook.com/Projectnextrace-105831111270530
Files for 3D Printing and every file you need for this project:
https://projectnextrace.gumroad.com/l/THGOnU
Required parts:
Wheel rim https://ali.ski/nIk8N
- Arduino pro-micro https://ali.ski/Q6Qiul
- MIcro USB cable https://ali.ski/51N-b
- 10x Push button https://ali.ski/xQoS-Z
- 2x Microswitch https://ali.ski/W9DuR
- 2x 10x5mm Magnets https://ali.ski/ArLnG3
- 16x M3x8mm bolt https://ali.ski/gJLB7L
- 16 M3 Nut https://ali.ski/xZZaPf
- 4x M2x10mm bolt https://ali.ski/T8jZLW
- 6x M3x25mm bolt https://ali.ski/gJLB7L
- 6x M5x35mm bolt https://ali.ski/gJLB7L
- 6x M5 washer https://ali.ski/lkiCIV
- 6x M5 Nut https://ali.ski/xZZaPf
Required libraries for arduino:
https://playground.arduino.cc/Code/Keypad/
https://github.com/MHeironimus/ArduinoJoystickLibrary