Fixed my car with a PTFE tube | Dacia Duster 1.5 Dci

Channel:
United Kingdom Geb Systems
Subscribers:
573
Published on ● Video Link: https://www.youtube.com/watch?v=pVh5O-jDwO4


Duration: 0:00
156 views
2

I never imagined that I will use a PTFE tube from my filament dryer to actually fix my car. The main air intake (I am guessing that is what it is responsible for) pipe broke off and ripped a smaller pipe for the air sensor. So this is a temporary solution to keep everything happy! I also used zip ties to keep the intake pipe tightly attached. Works so far!



Other Videos By Geb Systems


2025-05-253D Printing My K-Pop Card Dispenser with Lume Filament! 💜✨
2025-05-24Testing LUME3D Filament on Qidi Plus 4
2025-05-18Adding distance sensor! #arduinoproject #arduino #wallart
2025-05-13#arduinoproject #arduino #wallart
2025-05-11Interactive wall art V3 - basic web interface demo | Arduino UNO R4 Wifi | Modbus | !Ai
2025-05-07Interactive wall art V3 | Arduino UNO R4 Wifi | Modbus | !Ai
2025-05-04Arduino Project, wall art!
2025-04-27Interactive wall art V2 | Arduino UNO R4 Wifi | Modbus | !Ai
2025-04-10ArduinoUNO R4 RTU Modbus | !Ai
2025-03-23Crazy Bubble interactive wall art V1 | Arduino OPTA | Modbus | !Ai
2025-02-21Fixed my car with a PTFE tube | Dacia Duster 1.5 Dci
2024-12-14HyperX Cloud 2 Replacement Brackets #3dprinting #hyperx
2024-12-04TP Link Omada Test Rig Upgrade | DIY Warehousing | GebWMS
2024-12-01A tool for handheld Android barcode scanner | GebWMS
2024-11-26Qidi Plus 4 My first impressions and print | !Ai
2024-11-23Plus 4 replacing my Magicians! #qidi #3dprinting
2024-11-19Raspberry Pi as the DHCP server for a basic Omada setup #3dprinting #raspberrypi
2024-11-17Two issues with the TP Link Omada | DIY Warehousing | GebWMS
2024-11-11TP Link Omada Test Rig | DIY Warehousing | GebWMS
2024-11-06Upgrading Automation: From Arduino UNO to the New Arduino OPTA!
2024-11-01Govee H7060 Outdoor Flood Lights | Not a review