How I got my Power and HD LED lights working on my piMiga
2I found that there are not a lot of videos on the internet explaining how to connect Amiga LED lights to a pi 4B, so I thought I would show my progress making my piMiga act like an actual A1200.
My previous video came up with some problems, so this time round I am using the pi 4B to power the HD and Power LED lights. The HD light will flash each time the SD card is accessed.
Commands added to the /boot/config file:
dtoverlay=act-led,activelow=on,gpio=19
what it does: act-led(HD LED),activelow=on(turns off LED when not loading anything),gpio=19 (the pin used for the HD LED which is the top left, third in - white LED pin)
enable_uart=1
what it does: Power LED on (bottom right, black LED pin 2, yellow LED pin 3)
These LED connections might be different if the LED component was not bought from amigakit.
Previously on piMiga...
How I fixed my piMiga slowing down on a 4K TV: https://www.youtube.com/watch?v=IsmgraHk_qg
How it started: https://www.youtube.com/watch?v=2dl0ulCMLKY&t=0s
The parts I bought...
Keyrah: https://amigakit.amiga.store/keyrah-white-p-1144.html
A1200 Triple LED Adapter: https://amigakit.amiga.store/a1200-triple-adapter-powerhard-diskfloppy-disk-lights-p-564.html?aksid=6kf2rnsosnk5rch34ipdbn0ih0¤cy=GBP
Premium Female/Male 'Extension' Jumper : https://thepihut.com/products/premium-female-male-extension-jumper-wires-20-x-6
Amiga case: https://amigaonthelake.com/amiga-a1200-dark-blue-case/
Keyboard was bought on Ebay.