How to Add Cisco Router IOS Images to GNS3 | SYSNETTECH Solutions
64This video shows the steps to add the Cisco Router IOS image to the GNS3 network simulator program used to prepare for the Cisco exams.
✅ S U B S C R I B E ► http://goo.gl/8d0iG9
✅ Article ► https://www.sysnettechsolutions.com/en/add-cisco-ios-gns3/
To upload the Cisco Router/Switch:
Step 1: If you have not installed GNS3 on Windows, Linux, or macOS before, please refer to the videos below.
Windows ➦ https://www.youtube.com/watch?v=uhWt6TPNp-A
Linux ➦ https://www.youtube.com/watch?v=XU6gf_Reiuk
macOS ➦ https://www.youtube.com/watch?v=LQr-OnpH0v4
Step 2: After installing it, the first thing you need to do is get a #Router #IOS image.
Step 3: You can download the IOS images running on #GNS3 from the link in our article.
Step 4: In this video, we will add the Cisco Router 7200 IOS image.
Step 5: Download the Router 7200 IOS image to your computer and then run the simulator software.
Step 6: After running it, you will see the Setup Wizard window. In this window, select the Run only legacy IOS on my computer only and then click Next.
➦ Run only legacy IOS on my computer only
Step 7: Click the Next button in the Local Server Configuration window.
➦ Local Server Configuration
Step 8: In the New Appliance Template window, check the Add an IOS Router using a real IOS image (supported by Dynamips) option and click the OK button.
➦ Add an IOS Router using a real IOS image (supported by Dynamips)
Step 9: In the IOS Image window, click the Browse button to add the Cisco IOS that you downloaded to your computer.
Step 10: Select the IOS image and click the Open button.
Step 11: Decompress Cisco Router IOS image.
Step 12: After adding the Router, click Next.
Step 13: In the Name and Platform window, select c7200, and click Next.
Step 14: Set the 256 MB RAM value for the Router 7200.
Step 15: In the Network Adapters window, you can add FastEthernet, GigabitEthernet, or Serial Interface to the Cisco Router. Select C7200-IO-FE in the slot0 and click Next.
Step 16: Set the Idle-PC value for Router.
Step 17: Add the Router to the workspace and run it.
Step 18: Click the Start / Resume all nodes button to run the router.
➦ Start / Resume all nodes
Step 19: After copying Cisco IOS, you can now start working on the Cisco exams.
Step 20: Subscribe to our YouTube channel for more videos on Cisco networking training!
─────BEST PRODUCT FOR CISCO TRAINING──────
✅ Buy ► http://bit.ly/CiscoNetworkingEssentials
───────────────RELATED VIDEOS───────────────
➊ How to Add Layer 2 Switch in GNS3
➦ https://www.youtube.com/watch?v=vWvXKXas8WA
➋ How to Add Layer 3 Switch in GNS3
➦ https://www.youtube.com/watch?v=rxt_qPOECW0
➌ How to Upgrade GNS3 VM
➦ https://www.youtube.com/watch?v=Kd_HzguR6gg
➍ How to Import GNS3 VM
➦ https://www.youtube.com/watch?v=wLOdTPsN_9M
➎ How to Use VPCS in GNS3
➦ https://www.youtube.com/watch?v=YUN38b9pRn8
───────────────FOLLOW US───────────────────
✔ Facebook
➦ https://www.facebook.com/SysnettechSolutions/
✔ Twitter
➦ https://twitter.com/SysnettechS/
✔ Pinterest
➦ https://www.pinterest.com/SysnettechS/
✔ Instagram
➦ https://www.instagram.com/sysnettech_solutions/
✔ LinkedIn
➦ https://linkedin.com/in/tolqabaqci/
███████████████████████████████████████████