Duration: 0:00

26 views

0

To reset a Ciena router, follow these general steps, keeping in mind that specifics may vary based on the model. Here's a basic procedure:
Access the Admin Interface:
Connect to the Ciena router via a web browser or command-line interface (CLI). Typically, you'll enter the router's IP address into a browser.
Log in with your administrator credentials.
Locate the Reset Option:
Once inside the admin interface, navigate to the "Maintenance" or "System" section.
Look for an option like "Factory Reset" or "Restore to Default Settings."
Perform the Reset:
Select the reset option and confirm the action. This will restore the router to its original factory settings, erasing all current configurations.
The router may reboot automatically after the reset process.
Manual Reset (Hardware Method):
If you cannot access the router interface, look for a reset button on the device itself.
Press and hold the reset button (often for 10-30 seconds) until the router’s lights flash, indicating that the reset process has started.
Reconfigure the Router:
After the reset, you'll need to log in using the default credentials (usually provided in the router's manual) and reconfigure the router settings.
For precise instructions, it's important to refer to the user manual of your specific Ciena model. #ciena

Disclaimer: As an Amazon Associate I earn from qualified purchases.
#ad