How to setup a wireless router tp link router

Channel:
Subscribers:
8,039
Published on ● Video Link: https://www.youtube.com/watch?v=P1AnITMTIlc



Category:
Tutorial
Duration: 4:29
193 views
2


HOW TO SETUP A WIRELESS ROUTER tp link Router.
WAN Connection Type:

If your ISP is running a DHCP server, select the Dynamic IP option.

If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select the Static IP option.

If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option.

If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option.

If your ISP provides L2TP connection, please select L2TP/Russia L2TP option.

If your ISP provides PPTP connection, please select PPTP/Russia PPTP option.

If you don't know how to choose the appropriate connection type, click the Detect button to allow the Device to automatically search your Internet connection for servers and protocols. The connection type will be reported when an active Internet service is successfully detected by the Device. This report is for your reference only. To make sure the connection type your ISP provides, please refer to the ISP. The various types of Internet connections that the Device can detect are as follows:

PPPoE/Russia PPPoE - Connections which use PPPoE that requires a user name and password.
Dynamic IP - Connections which use dynamic IP address assignment.
Static IP - Connections which use static IP address assignment.
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP.

Default Gateway - Enter the default gateway in dotted-decimal notation provided by your ISP.

MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

Primary DNS - Enter the DNS IP address in dotted-decimal notation provided by your ISP.

Secondary DNS - Enter another DNS IP address in dotted-decimal notation provided by your ISP.
If you think that this video tutorial is very helpful for you then please LIKE and SHARE with friends and also do SUBSCRIBE for more future video tutorials.....Thank You....
https://youtube.com/subhojitdp ----- YOUTUBE LINK
https://facebook.com/infotech.dp ----- FACEBOOK LINK
Are you looking for these below questions? Then this tutorial is for you friends.

how to configure router tp link
how to configure router d'link
setting up wireless internet connection
how to configure router step by step
how to setup a netgear router
how to setup modem
how to configure a cisco router
how to connect router to modem wirelessly







Tags:
router
how to set up wireles router tp link
how to limit wifi speed for others on tp link router
how to setup dlink wifi router
tp link router
tp link router setup
how to set up wifi router
tp link
wireless
wifi router setup
tp-link
wireless router
how to limit speed on router
set up wireles router tp link
dlink wireless router
how to
wifi
wifi router
wireless lan (industry)
how to set up dir600l
setting up wifi router
link
setup
tp
lan
wan
wireless lan