How to enable MAC Filtering on Tp-Link Router
16HOW TO CONFIGURE WIRELESS MAC FILTERING ON TP-LINK Router ROUTER
The Wireless MAC Address Filtering feature allows you to control the wireless stations accessing the AP, which depend on the station's MAC addresses.
MAC Address - The wireless station's MAC address that you want to apply the filtering rules to.
Status - The status of this entry, either Enabled or Disabled.
Description - A simple description of the wireless station.
Modify - Here you can modify or delete an existing rule.
To disable the Wireless MAC Address Filters feature, keep the default setting, Disable.
To set up an entry, click Enable, and follow these instructions:
First, you must decide whether the specified wireless stations can or cannot access the AP. If you desire that the specified wireless stations can access the AP, please select the radio button Allow the stations specified by any enabled entries in the list to access, otherwise, select the radio button Deny the stations specified by any enabled entries in the list to access.
To Add a Wireless MAC Address filtering entry, click the Add New... button, and following these instructions:
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example, 00-0A-EB-B0-00-0B.
Enter a simple description of the wireless station in the Description field. For example, Wireless station A.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
Click the Save button to save this entry.
To add other entries, repeat steps 1~4.
To modify or delete an existing entry:
Click the Modify or Delete button in the modify column in the MAC Address Filtering Table.
Enter the value as desired in the Add or Modify Wireless MAC Address Filtering entry page, and click the Save button.
You can click the Enable All button to make all the Entries enabled, click the Disable All button to make all the Entries disabled, click the Delete All button to delete all the entries.
Click the Next button to go to the next page and click the Previous button to return to the previous page.
Note: If you enable the function and select the Allow the stations specified by any enabled entries in the list to access for Filtering Rules, and there are not any enable entries in the list, thus, no wireless stations can access the AP.
https://youtube.com/subhojitdp ----- YOUTUBE LINK
https://facebook.com/infotech.dp ----- FACEBOOK LINK
Are you looking for these below questions? Then this tutorial is for you.
Router configuration 04 - HOW TO ENABLE WIRELESS MAC FILTERING IN TP-LINK ROUTER?
mac address filtering software
mac filter hack
how to enable mac address filtering
mac filtering Netgear
how to add mac address in Dlink router
disable mac address filtering
mac filtering software
what is mac address filtering
https://youtu.be/PzKYfCrHwz8
#RealTechStayConnected #RealTech