How to Setup/Configure Network Settings LAN/WAN on TP Link Router
358How to Setup/Configure Network Settings LAN/WAN in Tp Link Router || How to setup TP-LINK wireless internet router (Hindi Titorials)
You can configure the IP parameters of LAN on this page.
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can not be changed.
IP Address - Enter the IP address of your Device in dotted-decimal notation (factory default - 192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Usually it is 255.255.255.0 .
Note:
If you change the LAN IP address, you must use the new IP address to login to the Device.
If the new LAN IP address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured
WAN Help
WAN Connection Type:
If your ISP is running a DHCP server, select the Dynamic IP option.
If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select the Static IP option.
If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option.
If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option.
If your ISP provides L2TP connection, please select L2TP/Russia L2TP option.
If your ISP provides PPTP connection, please select PPTP/Russia PPTP option.
If you don't know how to choose the appropriate connection type, click the Detect button to allow the Device to automatically search your Internet connection for servers and protocols. The connection type will be reported when an active Internet service is successfully detected by the Device. This report is for your reference only. To make sure the connection type your ISP provides, please refer to the ISP. The various types of Internet connections that the Device can detect are as follows:
PPPoE/Russia PPPoE - Connections which use PPPoE that requires a user name and password.
Dynamic IP - Connections which use dynamic IP address assignment.
Static IP - Connections which use static IP address assignment.
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP.
Default Gateway - Enter the default gateway in dotted-decimal notation provided by your ISP.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
Primary DNS - Enter the DNS IP address in dotted-decimal notation provided by your ISP.
Secondary DNS - Enter another DNS IP address in dotted-decimal notation provided by your ISP.
Click the Save button when you finish changing the settings.
https://youtube.com/subhojitdp ----- YOUTUBE LINK
https://facebook.com/infotech.dp ----- FACEBOOK LINK
http://kaitect.com/bZS ----- visit BLOG for computer programming
Are you looking for these below questions? Then this tutorial is for you friends.
how to configure router step by step
how to configure router tp link
wireless router settings
setting up wireless internet connection
home wireless network setup
router settings ip